Ask HN: How to measure if a person is sitting on a chair?
I have restaurant biz startup. A big problem I have is how to measure the impact of my solution, i.e. measure the occupancy at the restaurants. Neither I, nor the restaurants have a good solution for this. So I thought this could be a business I could provide.
So my question is: which technology would be a better aproach to record if there is a person sitting on a chair?
Requirements: - Must be very cheap - Must record somehow how much time is a chair empty or with someone sitting on it - Must be reliable
I imagine something that could be applied on a sticker. Maybe measuring pressure or something and sending a signal to a hardware when it is occupied. Then this central hardware keep track of the time it is recieving a signal or not.
Any ideas?
(
13 comments
| 4 points
| on HN
)
Edit: you might even be able to use something a little more passive. If the chair was equipped with a small, low-power RFID tag that had enough logic to simply toggle its state [vacant|occupied] based on the pressure sensor, you could then position an RFID reader somewhere in the dining area that periodically polled the devices in the chairs. Then you don't have to worry about the chairs having enough power to run an active device.
Bingo, now you can track which rear end is sitting where.
Seriously though, there are some good options with RFID tags. Does it really have to be per chair, or could it be people per table?
You could put an RFID chip on each menu (though the menu would need to be left at the table for the duration of the customer's visit, and you would always need to provide 1 menu per customer).
If you didn't want to use menus then you could use something else instead, as long as you could RFID tag it.
When you go into clothes store changing room you often get given a tag with a number on it. That tag number defines that number of clothing items you have taken into the changing room with you and it reduces theft.
You could operate a similar system, but based on the customers sitting at the table. It won't tell you which seats are being sat on, but it will tell the occupancy per table.
Any RFID or sensor base system will be complex, cumbersome and costly. Any passive sensor will require manual scanning. Any active sensor system with receiver will be expensive specially for restaurant with large seating area.
Another option may be an incentive based passive RFID sticker. A guest receives a sticker upon arrival and gets some sort of incentive/reward on scanning the sticker at exit. Then you can capture the time in the restaurant or on the table.
Are you interested in just the number of people in the restaurant? Or, more importantly, how many people are ordering food? Because you could have a table of four share a $10 appetizer and you'd count 4 people.
How much added value does the sitting aspect add, considering that it would cost a lot of if you had to retrofit these onto your seats?