Re:Panasonic and Tesla Sign Agreement for the Gigafactory
by jacquesm on Thursday July 31, 2014 @10:07AM
(#8114151)
Because it would be more expensive and the space gain would be very small.
Battery geometry is mostly dictated by physics and economics, even though a flat plate battery would be denser the gains in density would be off-set by the increase in cost and in the end the wasted space doubles as a cooling channel so you might end up having to separate your flat plates by periodic air channels anyway.
The reason why flat plates are better in some applications (for instance, for starter batteries in cars) is because those batteries are optimized for very high current during very short bursts of time. 300 Amps @ 12V is 3.6KW out of a very compact little box. The power generated from that little package is extremely impressive (if you pull the distributor cap on your car (if you have an old car) you can actually move the car for a bit on the starter engine in first gear or reverse!) but because of the short duration the power absorbed by the battery is relatively small (current is absorbed by the internal resistance of the battery during charge and discharge leading to a warming up of the battery).
But it does not last for very long so heat removal is not usually a problem, and the charge currents are reasonably low, so again no big problem in removing the heat (low current, longer time).
With electric vehicles the situation is reversed, the discharge time is relatively long (hours) but the charge times are getting ever shorter which means packs have to be actively cooled to avoid overheating, and the easiest way to do that is to flow air through gaps in the cells.
Battery geometry is mostly dictated by physics and economics, even though a flat plate battery would be denser the gains in density would be off-set by the increase in cost and in the end the wasted space doubles as a cooling channel so you might end up having to separate your flat plates by periodic air channels anyway.
The reason why flat plates are better in some applications (for instance, for starter batteries in cars) is because those batteries are optimized for very high current during very short bursts of time. 300 Amps @ 12V is 3.6KW out of a very compact little box. The power generated from that little package is extremely impressive (if you pull the distributor cap on your car (if you have an old car) you can actually move the car for a bit on the starter engine in first gear or reverse!) but because of the short duration the power absorbed by the battery is relatively small (current is absorbed by the internal resistance of the battery during charge and discharge leading to a warming up of the battery).
But it does not last for very long so heat removal is not usually a problem, and the charge currents are reasonably low, so again no big problem in removing the heat (low current, longer time).
With electric vehicles the situation is reversed, the discharge time is relatively long (hours) but the charge times are getting ever shorter which means packs have to be actively cooled to avoid overheating, and the easiest way to do that is to flow air through gaps in the cells.