News for hackers. Stuff that matters.
Re:Calling All Hackers: Help Us Build an Open Wireless Router by wtallis on Sunday July 20, 2014 @03:25PM (#8061223)
The Raspberry Pi doesn't have any high-bandwidth peripheral connections, and the CPU is too weak to do high-speed routing with QoS. What's needed is an open source board with a modern CPU, a mini-PCIe slot or two for the wifi, and at least one or two GigE NICs. In other words, this:

http://www.pcengines.ch/apu.htm

Although once you add the wifi, case, power supply, and SD card or mSATA SSD, it's a bit on the expensive side.

Re:Calling All Hackers: Help Us Build an Open Wireless Router by nerdtalker on Sunday July 20, 2014 @05:29PM (#8061576)
I'm a huge fan of ALIX and its successor, APU. I've built dozens of ALIX boxes and most have years of uninterrupted uptime running either m0n0 or pfsense. I've never gotten anywhere close to that with any of the Broadcom or Atheros based embedded platforms which are essentially what you get with a consumer router.

People definitely need to be more aware of the x86 BSD based routing platforms like m0n0wall: http://m0n0.ch/wall/ and its fork pfsense: https://www.pfsense.org/

I'm surprised the EFF isn't championing some fork of those platforms, or just those two themselves. Trying to fix the problem by adding yet another platform is just going to cause problems. I'm a huge fan of the EFF but it seems to be championing rather strange initiatives lately like the open WiFi and now this.

Re:Calling All Hackers: Help Us Build an Open Wireless Router by samcrawford on Sunday July 20, 2014 @05:42PM (#8061614)
An alternative, if you want to truly get it manufactured yourself (the schematics and materials list are all open source):

https://www.turris.cz/en/hardware

This device is a lot more powerful than the PC Engines APU. As nice as the APU is, its CPU cannot support 1Gbps throughput over the NICs.

Re:Calling All Hackers: Help Us Build an Open Wireless Router by wtallis on Sunday July 20, 2014 @06:42PM (#8061781)
Got any references for the relative performance of that over the APU board? They're not using the AMD Geode processors anymore.

What you linked is a dual-core 1.2GHz 32-bit PPC built on a 45nm process. The APU used on the board I linked to is a dual-core 1GHz x86_64 built on a 40nm process. There's no way the PPC core is dramatically faster than the x86 core that was shown to have better IPC than Intel's Atom. The PPC SoC might be able to offload a lot of network stuff to fixed-function hardware, but one of the primary lessons learned from the CeroWRT project is that you can't trust any of the offload stuff to be well-behaved with respect to things like queue length management.

Re:Calling All Hackers: Help Us Build an Open Wireless Router by samcrawford on Monday July 21, 2014 @07:06AM (#8063213)
Yes. The APU maxes out around ~670Mbit/s using iperf [1]. I confirmed as much in correspondence with PC Engines too. Personally I _suspect_ it should be able to go much faster, but haven't got one to investigate yet.

The 1.2GHz PPC based router is hitting ~940Mbit/s (the most you can expect from a GE interface with protocol overheads) using iperf. I don't have a reference for that, but I've got one of the devices here and have performed that test myself.

1. http://planet.ipfire.org/post/pc-engines-apu1c-a-review

Re:Calling All Hackers: Help Us Build an Open Wireless Router by dtaht on Wednesday July 23, 2014 @10:36PM (#8077981)
Thank you for the performance statistics. We have done a lot of work on other hardware platforms to get them up to being able to saturate gigE or higher, with tuning and things like "Byte Queue Limits" support. The problem with the ppc thing is that most likely it has bufferbloat in a blob we can't fix. (news to the contrary welcomed). And hearing that the APU peaks at 670Mbit is disappointing, but perhaps someone will get some time to profile it and figure out why it is so bad - certainly we get gigE easily with intel based hardware.
Re:Calling All Hackers: Help Us Build an Open Wireless Router by bodski on Sunday July 20, 2014 @07:35PM (#8061913)
Failing a 'dream bard' like you mention a fairly good alternative is a laptop (scraptop) with a broken screen. It may need to be fairly high end, e.g. many Lenovo models I've seen (even X series) have two m-PCI slots available for Wifi.