News for hackers. Stuff that matters.
Re:Introducing Raspberry Pi B+ by durin42 on Monday July 14, 2014 @09:00AM (#8030652)
The Ethernet chip is a new one tho - maybe it's a little less terrible?

(No idea - my applications for the rpi don't depend on it being a speed demon on the network.)

Re:Introducing Raspberry Pi B+ by Alupis on Monday July 14, 2014 @11:01AM (#8031212)
The Ethernet speeds are limited by both the USB bus it's riding on, as well as the slow CPU processing power.

Although, for most of my projects so far, it's been plenty fast.

Re:Introducing Raspberry Pi B+ by tlrobinson on Monday July 14, 2014 @12:10PM (#8031575)
Any recommendations for similar small/cheap devices with better Ethernet?
Re:Introducing Raspberry Pi B+ by fanf2 on Tuesday July 15, 2014 @02:16AM (#8035053)
Have a look at the Beaglebone Black.
Re:Introducing Raspberry Pi B+ by jedahan on Monday July 14, 2014 @10:46AM (#8031148)
the ethernet chip seems to just be the 4 usb-port version instead of the 2 usb-port version.
Re:Introducing Raspberry Pi B+ by kephra on Monday July 14, 2014 @01:15PM (#8031966)
But as far as I read, the PI can still not boot over Ethernet, which is a requirement for me to boot into backup cycle (Installation = Restore), and it still can not wakeup on LAN.
Re:Introducing Raspberry Pi B+ by duskwuff on Monday July 14, 2014 @04:37PM (#8033084)
If you load U-Boot onto an SD card, the rPi can be configured to use that to boot over Ethernet. It's not a completely "pure" network boot, but that's impossible given the hardware. (There's simply nowhere for a bootloader to live besides the SD card.)
Re:Introducing Raspberry Pi B+ by Alupis on Monday July 14, 2014 @08:45PM (#8034094)
You need some sort of bootloader, even in a traditional PXE boot scenario... it's just that your BIOS hands off to the bootloader on your onboard PXE chip instead of to your OS's bootloader, etc. So, it's chain-booting no matter how you slice it.

You can setup your SD card to have U-Boot and not much else... just what's necessary for U-Boot to, well, boot. Then it takes over and does it's network boot of your full OS. So you can get a sort-of PXE boot setup.