This, in turn, means that you can realistically use a one-bit ADC in your receiver, because that only amounts to a few more dB of loss. You're already dealing with a system built to overcome massive loss and it can tolerate a little more.
http://www.mtcr.info/english/MTCR-April2011-Technical-Annex....
MTCR is also why GPS receivers will refuse to provide navigation information if you're flying too high or moving too fast.
One can, of course, out-design all of this with software and a decent front-end.
Basically, if you are sampling the thermal noise with a 1-bit ADC, you are measuring the times of the zero crossings. The GPS signal will affect the times of those zero crossings. The thermal noise will be random, and therefore over the long term will even out. The GPS signal is a very low bit rate (50 bits per second), so you can gather enough statistics to identify each bit.