News for hackers. Stuff that matters.
Re:Hardware Case Study: Why Lockitron Has Taken So Long To Ship by bravo22 on Sunday July 13, 2014 @07:52PM (#8028966)
You recharge your phone's battery. :)

Best WiFi today will consume about ~2mA when in standby. They are using ElectricImp which is a little worse.

People often look at "sleep" current of a WiFi module and think "oh boy I can run this for 2 years at like 100 micro amps". That is true if the WiFi module is turned off; useful if you are waking up, taking a reading, pushing data to the cloud, and then going back to sleep. But for a door you need to be listening on the network for an incoming packet all the time. How else would you know that the user wants you to open the door right now?

Alkaline AA batteries AT BEST have ~2600mAh of capacity. They run at 1.5V. You have 2600 x 1.5v = 3900 mWh of energy in each.

A Wifi module consuming ~3mA and 3.3V runs through that power at around 3900 / (3.3 * 3) = ~394 hours or about 16 days. 4 AA batteries and you'll get about 64 days or little over 2 months of usage.

Of course you'll get FAR LESS because:

A) You have to convert battery voltage to 3.3V and you'll get about 85% efficiency for a high current (300mA peak) needed for a WiFi device

B) You burn more energy when you actually send packets

C) You need quite a bit of power from those 4 AAs to actually turn the lock so you can't do the math assuming all your power is available for WiFi.

Re:Hardware Case Study: Why Lockitron Has Taken So Long To Ship by girvo on Sunday July 13, 2014 @07:59PM (#8028991)
Yeah, I was looking at it from the wrong angle, I didn't realise that the lock itself was running on battery! That makes a lot more sense then :)
Re:Hardware Case Study: Why Lockitron Has Taken So Long To Ship by swamp40 on Monday July 14, 2014 @12:11PM (#8031580)
>> Best WiFi today will consume about ~2mA when in standby.

So, what's the 2mA module?

Re:Hardware Case Study: Why Lockitron Has Taken So Long To Ship by bravo22 on Monday July 14, 2014 @04:03PM (#8032885)
A number of Qalcomm Atheros chips like AR4100P. Gainspan's GS1011 and their newer GS2000. Pretty much anyone supporting PS-POLL should get around that range.

Electric Imp gets close to that but they are over it a bit I believe.

Re:Hardware Case Study: Why Lockitron Has Taken So Long To Ship by swamp40 on Tuesday July 15, 2014 @12:32PM (#8037401)
Thanks! What's your opinion on which ARM Cortex uC uses the least amount of power?