Re:The SSD Endurance Experiment: Casualties on the way to a ...
by jmpe on Tuesday June 17, 2014 @10:17AM
(#7904537)
> The 100 is a normalized number, it's not the actual number of blocks.
I'm not too sure about that. The only ref I can give is that they use the suffix "Cnt_Tot" which means "total count". When it's a percentage they denote it as such as in "Perc_Rated_Life_Used" and "Workld_Host_Reads_Perc". Don't be surprised by the low count (100).
Re:The SSD Endurance Experiment: Casualties on the way to a ...
by yuriks on Tuesday June 17, 2014 @03:27PM
(#7906442)
That's how SMART attributes work. 100 means AOK and 0 means failed. The normalized number is reported by the drive, calculated by a formula based off the raw values and MTBF data determined by the manufacturer.
Re:The SSD Endurance Experiment: Casualties on the way to a ...
by jmpe on Thursday June 19, 2014 @06:07AM
(#7915415)
Ok, dug around in the code.
In Smartmontools I found the code for this variable:
http://smartmontools.sourceforge.net/doxygen/atacmds_8cpp_so...
It's code 179 (0xB3).
From Samsung's website:
http://www.samsung.com/global/business/semiconductor/minisit...
ID # 179 Used Reserved Block Count (total)
This attribute represents the number of reserved blocks that have been used as a result of a read, program or erase failure. This value is related to attribute 5 (Reallocated Sector Count) and will vary based on SSD density.
.. so at least for samsung there's use of exact numbers.From Intel's website:
http://download.intel.com/newsroom/kits/ssd/pdfs/intel_ssd_5...
(Ctrl-F for "Available Reserved Space")
.. they use a normalized value (100).
So it can be either percentage or absolute value, depending on manufacturer.
The 100 is a normalized number, it's not the actual number of blocks. (A percentage basically, so 100% are still left.)
If the drive used any blocks at all I'd worry about it, I would not consider it a wear indicator but rather a failure indicator.