News for hackers. Stuff that matters.
Re:Electric car with massive range in demo by Phinergy, Alcoa by JoeAltmaier on Wednesday June 04, 2014 @05:04PM (#7848299)
Maybe if the aluminum could be packaged as a liquid or a gel, it could be pumped in and out like gas.
Re:Electric car with massive range in demo by Phinergy, Alcoa by rpedela on Wednesday June 04, 2014 @05:27PM (#7848454)
Something that requires 1,221 F (660.3 C) doesn't seem like something you would want to sit on or pump without serious protection.
Re:Electric car with massive range in demo by Phinergy, Alcoa by pjc50 on Wednesday June 04, 2014 @06:04PM (#7848698)
Slurry, not molten. This (aluminium powder suspended in a liquid) was considered as a rocket fuel at one point.
Re:Electric car with massive range in demo by Phinergy, Alcoa by trhway on Wednesday June 04, 2014 @06:44PM (#7848909)
Russian super-sonic solid fuel anti-ship missiles burn aluminum based fuel in their ramjet engines :)
Re:Electric car with massive range in demo by Phinergy, Alcoa by lotsofmangos on Wednesday June 04, 2014 @06:57PM (#7848976)
The Space Shuttle solid rocket boosters were basically just oxidiser and aluminium powder.
Re:Electric car with massive range in demo by Phinergy, Alcoa by bane on Wednesday June 04, 2014 @05:30PM (#7848483)
Just use aluminum powder or prills. Bonus you get a huge surface area so the reactions happen fast.
Re:Electric car with massive range in demo by Phinergy, Alcoa by JoeAltmaier on Wednesday June 04, 2014 @05:34PM (#7848516)
and just dump the alumina result out the tailpipe - its just ceramic dust. And refill with new powder. So it becomes very much like the process of gasoline fueling.
Re:Electric car with massive range in demo by Phinergy, Alcoa by rpedela on Wednesday June 04, 2014 @06:26PM (#7848812)
I thought ceramic dust was toxic, at least in the large quantities a fleet of cars would produce? Is that not the case?
Re:Electric car with massive range in demo by Phinergy, Alcoa by JoeAltmaier on Thursday June 05, 2014 @12:13PM (#7852635)
Well, its non-reactive (doesn't break down with low or high ph). But I don't know otherwise.

A little Googling shows lots of problems with clay dust (toxins for coloring etc) but nothing about actual fired ceramic dust. For clay it seems to depend upon the particle size in large part. So some control there might help alleviate the risk.