News for hackers. Stuff that matters.
Re:ZFS Gotchas by takeda on Monday June 02, 2014 @02:07AM (#7832122)
I believe there are no problems with your scenario, there's zpool replace command which does this:

     zpool replace [-f] pool device [new_device]

         Replaces old_device with new_device.  This is equivalent to attaching
         new_device, waiting for it to resilver, and then detaching
         old_device.

         The size of new_device must be greater than or equal to the minimum
         size of all the devices in a mirror or raidz configuration.

         new_device is required if the pool is not redundant. If new_device is
         not specified, it defaults to old_device.  This form of replacement
         is useful after an existing disk has failed and has been physically
         replaced. In this case, the new disk may have the same /dev path as
         the old device, even though it is actually a different disk.  ZFS
         recognizes this.

         -f      Forces use of new_device, even if its appears to be in use.
                 Not all devices can be overridden in this manner.
Re:ZFS Gotchas by mosselman on Monday June 02, 2014 @08:35AM (#7833118)
Thanks for pointing this out. I still don't know how to see all of this in a home NAS context however. It would be really great if someone could explain.

Lets say I have 6 SATA ports. I have 4 drives that I collected from various computers that I now want to unify in a home built NAS:

   A. 1TB
   B. 2TB
   C. 4TB
   D. 1TB
   E. -empty-
   F. -empty-
Now all my drives are full and I want to either add a disk or replace a disk; How do I:

   1. replace disk A. with a 4TB disk
   2. add a 4TB disk on slot E.
Re:ZFS Gotchas by enneff on Monday June 02, 2014 @09:31AM (#7833320)

    1. connect 4T disk to F, "zpool replace pool A F"
    2. connect 4T disk to E, "zpool add pool E"
Where A, E, and F are virtual devices (vdevs) provided by your OS. On my FreeBSD system they are da0, da1, etc.
Re:ZFS Gotchas by mosselman on Wednesday June 04, 2014 @02:31PM (#7847279)
Thanks. There are a lot of complicated articles spread around which make ZFS seem very hard for some reason. This seems fine.