Re:It's time for the US to use the metric system
by fluffyllemon on Friday May 30, 2014 @09:44AM
(#7821701)
For a function to be a linear transform it needs two properties[1]:
1. F(c1 + c2) = F(c1) + F(c2)
2. F(k*c1) = k*F(c1)
Converting from Celsius->Fahrenheit (or vice versa) is does not have these properties. F(c) = 9/5 * c + 32
F(c1 + c2) = 9/5 * (c1 + c2) + 32
F(c1) + F(c2) = (9/5 * c1 + 32) + (9/5 * c2 + 32) = 9/5 * (c1 + c2) + 64
F(k*c1) = 9/5 * (k*c1) + 32
k*F(c1) = k * (9/5 * c1 + 32) = 9/5 * (k*c1) + k*32
Admittedly, I'm not entirely sure why being a non-linear transform gets the OP so riled up.
Re:It's time for the US to use the metric system
by raverbashing on Friday May 30, 2014 @12:02PM
(#7822493)
" Admittedly, I'm not entirely sure why being a non-linear transform gets the OP so riled up."
Because it's harder to calculate mentally
One can approximate 2lb to 1kg roughly, 1mi ~ 1.6km, but for Fahrenheit this is harder
One solution is to establish a set point ( 70F = 21.1C, approximate to 20C ) then work in differences, since 1.8deltaF = 1deltaC so, 2dF ~ 1dC (or 10dF ~ 5dC)
Hence, 90F is approximately 30C (exact value, 32.2C)
Re:It's time for the US to use the metric system
by icegreentea on Friday May 30, 2014 @09:16AM
(#7821549)
There's a constant offset between F and C, so it's not linear in the actual engineering/math (or whatever) sense.
Re:It's time for the US to use the metric system
by drdeca on Friday May 30, 2014 @09:41AM
(#7821678)
It's not proportional, but the equation for going from one to another is that of a line.
I would think this would be called linear, but that mean something more specific?
Re:It's time for the US to use the metric system
by icegreentea on Friday May 30, 2014 @09:47AM
(#7821716)
In engineering, linearity refers to having two properties:
a) f(x+y) = f(x) + f(y) where x, y, are two values, and f is a linear transform/function
b) af(x) = f(ax) where a is constant
In this case, the transform is the conversion between C and F. Since there is +/32 in there depending on direction, neither of these properties hold.
For example, yards to meters is a linear transform. 3 yards converted to meters + 2 yards converted to meters = 5 yards converted to meters. This is not true of temperature. Adding 32F to 32F gives 64F, which is not the same as adding 0C to 0C.
huh?