http://mikebeauchamp.com/misc/sennheiser-hd-555-to-hd-595-mo...
I've got a pair of HD558s which I quite like; indeed, they're the best headphones I've ever owned. What I'm curious about is this: Can someone who's actually done the foam mod give me an idea of whether the result is worth the risk? I'm pretty sure I can complete the modification without damaging my headphones, but I'd like to know it's worth my while before I carry it out. Thanks in advance!
I'd be more interested in a carefully controlled double blind trial.
I suspect most people would not be able to tell the difference between modfied and unmodified headphones, and that is before making adjustments for the terrible source quality of most people's MP3 collections.
I'd like to see a double-blind trial as well, but that's not what I'm after here; all I'm looking for, in the comment to which you replied, is a sense of whether it's worth my time to modify my headphones. Will I hear a difference? If I do, will it be genuinely there or simply a result of the placebo effect? Who knows? Who cares? If we were talking about $1000 cables, then, sure, it's worth asking those questions. But this is a non-destructive, easily reversible fifteen-minute modification to a pair of $150 headphones I already own, and can afford to replace if I slip and impale a driver or something. Given the minimal stakes, I'm strongly inclined to just go ahead and see what happens. If it makes, or seems to make, a difference, then great! I'll stick with it. If not, I'll put the foam back. Either way, I figure it's worth a shot.
Whether that difference is real, or some psychological boost you get from the "free upgrade to better headphones" is debatable.
I wouldn't do it because I'm a ham-fisted klutz and I'd probably damage something. Other people are not as clumsy as me!
None whatsoever, actually, with either music (1938 Karajan/Berliner Philharmonic recording of the overture to "The Magic Flute"), or the "Ultimate Headphone Test" files; any difference made by removing the foam is evidently so subtle as to be completely lost on me. I don't feel like dismantling my headphones again to put the foam back right now, so I'll leave it out (stuck to the inside of a Zip-loc bag, since I don't have any proper backing paper handy to preserve the adhesive) until the next time I take the pads off for cleaning, and put the foam back in then. I doubt I'll notice any more difference in sound at that point than I do now.
> I wouldn't do it because I'm a ham-fisted klutz and I'd probably damage something.
On the other hand, the modification really is as simple as its adherents purport it to be, especially since the cord is detachable; the only even vaguely dicey moment I had was when I took out the left driver and found that its connection to the cord socket PCB is made by a wire that's both quite short and very fine, and that the foam would have to come out past the wires to both drivers. If I'd dropped the driver, I'd probably have needed to trim the wire and heat up my iron, so I'm glad I didn't do that. Other than that, it was a snap; anyone can do it in ten minutes who has screwdriver, tweezers, and reasonably steady hands.
Edit: Now I think about it, what I really should have done was take the foam out of one side, but leave it in the other, and see if I could pick out any difference that way; having both sides in the same state makes it essentially impossible to compare. Perhaps, when it next comes time to clean my pads, I'll give that a try.
I've got a nice set of GE monitors from probably the mid 70s and they sound fantastic for music that's not incredibly bass heavy and were a quarter so that was nice.
Have you tested the Senn Momentums? They are closed and have a lot more low end than the 600/50s. I really liked them but, since I'm mostly alone at work, I went with the 650s.
I now use the Beyerdynamic DT990's (32 ohm version, because the FUD about needing a headphone amplifier scared me away from the higher resistance versions) and couldn't be more happy with them.
I've been dragging my feet selling them. Now I kind of want to. Thanks. :)
I have the Sennheiser HD650s and AKG K701s. Used to have the HD595 also. I tend to prefer the latter for most music, as well as speech. The Senns I find more preferrable for movies and classical music.
I also have an ancient pair of Grado SR-80s (or SR-60s?), which are by no means an expensive high-end headphone. But I still like their sound on some things.
Other people prefer considerably bassier headphones and I can see how that is a valid preference, especially considering how some electronic music is mixed.. in fact, I wouldn't mind having such a pair for myself.