If you want to read some analog sensor and it is at least somehow critical for you, you still have to use external ADC. There are some processors that have usable precision ADCs (MSP430AFExxx comes to mind), but they are not exactly SoCs capable of running Linux. Generally, ADCs on MCUs/SoCs are meant for non-critical applications, mostly concerned with user interface.
And having an ADC on board for non-critical stuff is still super useful for many projects. For example reading a thermister or LM335 to check the temperature of a water bath in a DIY sous-vide setup would be a great application of a cheap ADC on a Linux-based dev board. You don't need a crazy 24-bit ADC with precision voltage references, etc. just to measure if water is 140 vs 150 degrees F. A simple 10-12 bit ADC is great for many uses.
I don't agree with that--it might not be a use case to you, but is certainly a valid use case for these small development boards. Look at the success of Arduino, Maker Faire, 3D printing, DIY drones, etc. to see evidence of a large and vibrant DIY and maker community.
- Male header pins are kind of a pain to connect to a breadboard, at least compared to female pins on a Beaglebone Black or Arduino.
- I'm assuming there's no analog to digital converter, like the Raspberry Pi, so that's annoying if you're reading analog sensors or other things.
- Realtime support. Does the Allwinner A20 have any kind of realtime support microncontroller, kind of like PRU's on the Beaglebone Black? If not that's a bummer since interfacing with anything that has tight timing control (like lighting WS2811 LEDs) will be impossible or require more supporting circuitry.
Don't get me wrong though, an open/hackable stick computer that's not expensive is still very interesting and useful to some folks.