Re:MicroView: Chip-sized Arduino with built-in OLED Display
by schappim on Saturday March 22, 2014 @02:51PM
(#7450313)
I'm Marcus part of the MicroView team.
> if you think you can communicate enough information with a few LEDs
We actually started with that concept and made an Arduino compatible called the Magpie (basically an Uno with an LED on every IO pin see: http://littlebirdelectronics.com/products/magpie-100-arduino... ). Whilst the Magpie was a step forward it wasn't quite good enough, hence building the MicroView.
• 64x48 monochrome OLED
• In a forward facing case suitable for exposing to users. You'll still need to enclose the back.
• Tiny. Looks to be about 2.54cm square, depending on the size of his fingers. Not Arduino form factor.
• ATmega328P (32k flash, 1K EEPROM, 2k RAM)
• 12 I/O pins, 3 with PWM, 6 can be analog inputs, 5V logic
• Serial pins, no USB (but you can make ghetto if you need to with a couple resistors) There is a USB sled available for programming.
• 3.3V to 16V power input. No external components required.
• 600% funded, 25 days to go. Estimated delivery is August.