News for hackers. Stuff that matters.
Re:Make your own diamond-based thermal grease by jrockway on Tuesday August 04, 2009 @02:55PM (#741843)
That coating of thermal grease looks WAY too thick.

It also looks like he's measuring the temperature of the heat sink rather than the temperature of the die. If your thermal compound is acting as an insulator, then your heat sink is going to be nice and cold. (That smoke you smell is your processor melting through the bottom of your case, however.)

Finally, if you want to test heatsinks, it's better to use a resistive heating element instead of the CPU. You can't control how much heat the CPU is putting out (what with automatic frequency scaling and whatnot), but you can control how much current you are pumping through a resistor. Dan's Data has an article about this:

http://www.dansdata.com/coolercomp.htm

Re:Make your own diamond-based thermal grease by Retric on Tuesday August 04, 2009 @10:27PM (#742704)
Residence increases as temperature increases, so better heat dissipation can dramatically reduce temperatures. Also if your heat sink is not working you have less than 5 seconds until this chip fries or shuts down to save it's self. So if the system boots then the heat sink really is working.

PS: Diamond is an great thermal conductor. (http://en.wikipedia.org/wiki/Thermal_conductivity) W/(m·K) Copper = 401, Silver = 429, Diamond = 900+