Re:Nuclear Fusion Startup
by jacquesm on Sunday August 02, 2009 @05:26AM
(#737254)
I couldn't help but laugh out loud at this line:
"General Fusion's basic approach isn't entirely new. It builds on work done during the 1980s by the U.S. Naval Research Laboratory, based on a concept called Linus."
On a more serious note, I wonder how they will deal with metal fatigue on the sphere being rammed by the pistons once every second. Not all of the energy of those compressions will be transferred into the fluid, that sounds like the reactor core might become a wear item.
Another question regarding this:
"likely because the technology to precisely control the speed and simultaneous triggering of the compressed-air pistons simply didn't exist two decades ago."
What is so critical about controlling compressed air pistons ? They move at a snails pace relative to electronics from the 70's, why is it that only now this would be possible based on controlling essentially very slow devices once-per-second ?
And wouldn't it be easier to do this using electromagnets attached to the outer shell at strategic spots ? much faster response time and higher frequencies possible, also much easier to synchronize than 220 pneumatic hammers striking a sphere. Is there really no other way to get the required wave pattern ?
What will happen to the fusion energy if one of the hammers would fail due to a seizure or seal failure of a single pneumatic ram (this is not a theoretical failure, it happens).
"General Fusion's basic approach isn't entirely new. It builds on work done during the 1980s by the U.S. Naval Research Laboratory, based on a concept called Linus."
On a more serious note, I wonder how they will deal with metal fatigue on the sphere being rammed by the pistons once every second. Not all of the energy of those compressions will be transferred into the fluid, that sounds like the reactor core might become a wear item.
Another question regarding this:
"likely because the technology to precisely control the speed and simultaneous triggering of the compressed-air pistons simply didn't exist two decades ago."
What is so critical about controlling compressed air pistons ? They move at a snails pace relative to electronics from the 70's, why is it that only now this would be possible based on controlling essentially very slow devices once-per-second ?
And wouldn't it be easier to do this using electromagnets attached to the outer shell at strategic spots ? much faster response time and higher frequencies possible, also much easier to synchronize than 220 pneumatic hammers striking a sphere. Is there really no other way to get the required wave pattern ?
What will happen to the fusion energy if one of the hammers would fail due to a seizure or seal failure of a single pneumatic ram (this is not a theoretical failure, it happens).