Re:Anyone Who Still Thinks IPv6 Won't Happen Isn't Watching ...
by apaprocki on Monday February 24, 2014 @12:40PM
(#7292115)
See, I have exactly the same setup (SB6xxx + AE) and on TWC in NYC it just doesn't work. The AE gets an IPv6 address from the modem, but TWC isn't assigning it a prefix, so all IPv6 devices behind the AE just sit there twiddling their digital thumbs.
Re:Anyone Who Still Thinks IPv6 Won't Happen Isn't Watching ...
by zaphoyd on Monday February 24, 2014 @12:42PM
(#7292132)
TWC is definitely not as far along in their deployment. It might just take some more time. =\
Edit: If I recall correctly, when Comcast was doing their initial deployment they started with end nodes only (not delegating prefixes). Then moved to delegated /64s. Now are moving on to delegated /60s and more.
Re:Anyone Who Still Thinks IPv6 Won't Happen Isn't Watching ...
by simon_vetter on Monday February 24, 2014 @03:00PM
(#7293066)
Some older AE/TC don't support DHCP-PD even if you update them with the latest firmware (that's really a shame IMHO).
It might also just be your AE settings. Check that it is configured in router mode, with access mode set to native or automatic.
http://www.dslreports.com/forum/r27251137-IPv6-Time-Capsule-...
Re:Anyone Who Still Thinks IPv6 Won't Happen Isn't Watching ...
by toomuchtodo on Monday February 24, 2014 @02:44PM
(#7292976)
I'm in Schaumburg, and have had the same experience, but with a Linksys E3200 access point. Plugged into Motorola Comcast modem, and dual-stack came right up.
The Airport Base has an IPv6 page that shows what the delegated /64 subnet is. All the devices on my network have autoconfigured themselves with addresses in that range. I appear to be able to manually set hosts to any address in that range as well and it seems to work fine. I do this on some of my server VMs because otherwise they generate a new random address every few days (privacy mode woo). The privacy addressing makes assigning a DNS name to said VM more difficult. I've had the same /64 delegated to me since June 2012.
I've heard that you can request a /60 prefix (16 subnets) if your router supports IPv6 Prefix Delegation (pretty sure the Apple one doesn't). I don't know exactly how you go about doing that though. I'd probably start with the HSI forums on dslreports.com