The second problem also frankly doesn't matter much. Aerobraking is cheap and efficient. I don't remember the specs but it scales pretty well, even when small, such that one pound of re-entry vehicle can land something like 20 pounds of "stuff" if you do it right, so rather than building a second elevator you simply "give up" on 5% of the first elevators capacity. Weight of heat shield is immensely lower than weight of fuel to get up there so don't even bother with reusable shields. Also once you get something up there, you should never return it with the exception (possibly?) of people. So keep a stockpile of shipping crates of re-entry capsules up there and never take anything down. Ever. Except maybe emergency medi-vac. If it costs almost nothing to get it up there, send up a solar powered foundry and a solar powered machine tool plant and start squirting out a stockpile of rough spare parts and panels and the like.
As for the edit, the hidden assumption is the cables "have to be" side by side. However the fuel cost to travel along an orbit is basically zilch compared to getting up there. And the materials science concerns of basically building a cablecar elevator are limited. So if you really, really insist on installing a "down" elevator, simply up the "up" in Africa and the "down" over south america and if you still manage to tangle them, you must have totally screwed up beyond all recovery anyway.
First, the energy required to keep the ... err... toppiece? stable is significantly less than the energy required to launch something into the same orbit.
Second, I think that the metaphorical centrifugal force will bring the toppiece back to where it began. That is, there is a stable equilibrium with the toppiece at its highest point, and bringing it out of that equilibrium will be resisted.
Edit: Certainly the total energy required, from the train and toppiece stabilization, is the same as the energy required to get something into orbit, but to stabilize would require thrusters, while climbing can be done electronically against the chain.
There is lateral force from the climber to the cable, yes. But if the net mass flow to/from the top is zero, you don't have to compensate. You only compensate for the net flow. You do that by applying orbital corrections to the station at the top.
If the climber is not rising at hypersonic speeds, the lateral force is pretty tiny - literally lost in the error margin, compared to the tension in most of the cable length.
The climbers would have to rise fast, and the journey would be long anyway, yes. Basically, we would have to marry high-speed train technology (for speed) with Orient Express or ocean liner amenities (against boredom). The view would be spectacular, and would be a major part of the entertainment.
It's probably best to build cables in pairs, one going up, the other down.
With that, you could potentially send up as many simultaneous climbers as the cable could support.
So it seems like the cable would sway backward as it lifts the climber, and be pushed forward almost as far when the climber descends again. If the mass at the end of the cable included some kind of constant low-grade thrust, maybe you could bank up angular momentum between runs to account for the mass of the payloads.
I'd love it if someone with more physics background could weigh in on it though.
There is tension on the cable, the counterweight at the top will pull the cable straight.
> I don't think anybody would engage in a project that cost trillions of dollars to get built, and then can only send 12 missions per year into orbit.
That's a good point, single space elevators don't scale very well if there's bidirectional traffic on a single cable. Jettisoning the climber at the top is certainly feasible in the beginning, but once we're really using space (which the elevator could finally enable us to do) we're going to need the elevator as a safe return vehicle. In the long run, we're going to need drastically more space elevators, and it might make sense to have a dual ribbon for each elevator, allowing full duplex.
Right now it's about getting someone to build the first one, though. Baby steps.
Building the second one requires you to push the "Copy" button.
1) A vehicle starting at the earths surface has the moment of earths rotation. As it climbs the cable it would need to be accelerated to a suitable orbital momentum. If you don't do this, then it'll "tug" on the cable counter its rotation.
Edit: To clarify why that is a problem. The climber would be accelerated by the tension of the cable, but as that happens, the cable would be bent at the point of the climber, which might be problematic. Also the counterweight that provides the tension would be decelerated, so the whole cable would "tilt". That is all, as long as the climber climbs. When it stops climbing (or is jettisoned), both counterweight and climber would now start a pendulum motion (at different frequencies). That's probably also not good.
2) To reach geostationary orbit at a speed of say 100km/h would take 2 weeks. Traveling 500km/h it would still take 3 days. Unless you jettison the climber at the top, only one climber could be on the cable at any one time, and that would put a lot of strain on recovering the initial cost of building the elevator by putting an upper bound on how often you can send a climber up to anything between every 6 days to a month. I don't think anybody would engage in a project that cost trillions of dollars to get built, and then can only send 12 missions per year into orbit.
Edit: People are pointing out that a second cable would solve this issue. I think it might be challenging to keep the two cables from tangling up across a tens of thousands of kilometers.