http://en.wikipedia.org/wiki/Copper_indium_gallium_selenide_...
One of the startups, nanosolar, seems to have failed.
http://en.wikipedia.org/wiki/Nanosolar
You can actually pick up some nanosolar stuff on ebay right now.
http://www.ebay.com/itm/like/151190922913?lpid=82
I am not sure if there are any other companies still trying to make a go of this but last I checked -- a couple of years ago -- there were two or three others.
What's the difference between GaAs and CIGS?
But of course the devil was in the details. This was a hardware based company so it's not terribly surprising that their R&D time went out past their funding. Look at how badly hardware Kickstarts do on average, blowing multiple "deadlines" because often-times hardware is more difficult than software. Not that it's impossible, but it's definitely unforgiving.
When it absolutely has to be exactly right the first time it's going to take a lot longer than you think, even once you account for the fact that its' going to take a lot longer than you think.
He lives comfortably on ~300 watts and recently bought a 100 watt panel for $130 shipped. His biggest expense? Batteries. Solar panels last, but batteries have to be constantly maintained and replaced.
Without a cheap, reliable storage medium, solar is useless or extremely expensive. All the more so at power plant scale. Maybe solar+hydro combination installations would work.
In the "real-world", solar is connected to the grid, and the grid acts like the storage.
Storage becomes an actual concern when solar becomes a large fraction of the grid usage. Or in somewhat contrived situations such as an off-the-grid home using solar as the sole source of power.
The most efficient alternative is to pump water up, then drop it through a turbine later. But world wide the total storage is only 3% of instantaneous generation capacity. So you can absorb/produce less than an hour's worth of electricity. Good for evening out a little fluctuation, but not a big one.
This is why natural gas is catching on. You can spin it up and down quickly, to accommodate the fact that wind and solar fluctuate quickly. By comparison both coal and nuclear require boiling a big tank of water. That's slow to heat up, and slow to cool down, so it doesn't adjust very fast as external power changes.
Fracking might have more to do with its sudden resurgence it than peaker plants, although granted it is probably the easiest power source to scale up and down.
Really? Why is it more so at power plant scale? When you're connected to the grid you have the benefit of being attached to more users, which seems like it'd increase the probability that someone somewhere could use the power. Lots of power plants - e.g. anything fossil fuel based can simply burn less fuel - can reduce their output fairly simply, so until they all bottom out it seems you wouldn't have a problem getting the energy to someone who wants it.
Where this starts to fall apart is transmission losses; there is benefit to having the consumers and producers be closer together, in terms of resistance. It's possible that high-Tc superconductors may help in this space in the coming decades.
SSSSSSSSSPPPPPPPPPPPPPPPPPPPPPPPPPPPP
SSSSSSSSSPPPPPPPPP
SSSSSSSSSPPPPPP
Note that installation costs can be dwarfed by panel costs if you are in a third world country, where wages are lower.
I agree about the rest of the infrastructure required. Batteries, charge controllers and inverters are very expensive still. More appliances need to use DC, so that we can use less inverters.
We seem to be in the first iteration of optimisation right now (from what I understand of the article).
Other types of cells have more complex growth and fabrication processes, often requiring a vacuum, tight stoichiometry/growth control, and expensive/finnicky/dangerous precursors.