News for hackers. Stuff that matters.
Re:Andrea Rossi has started commercializing ECAT nuclear fus... by lafar6502 on Tuesday November 26, 2013 @11:23AM (#6802240)
As stated in technical parameters: the water pump output is 30-1500 liters/hour, it means max 0.4 liter per second. Assuming it raises the temperature of water by 40 degrees K, the energy output per second is 4200J/kgK 0.5kg * 40K = 84000 Joules/sec = 84 kW. Assuming it draws 167kW, it's much worse than any electric water heater.
Re:Andrea Rossi has started commercializing ECAT nuclear fus... by gus_massa on Tuesday November 26, 2013 @01:20PM (#6803069)
Nice finding!

But let’s be optimistic! If we pick the maximum range in the technical specification [1] and suppose that the temperature difference were 120°C then it would only generate 0.21MW [2]. Just in case, I checked and at 4Bar, the boiling point of water is 144°C [3], so the device is not producing vapor, only hot water.

[1] http://ecat.com/ecat-products/ecat-1-mw/ecat-1mw-technical-d...

[2] http://www.wolframalpha.com/input/?i=1500+kg%2Fhr+*+1+cal%2F...

[3] http://www.engineeringtoolbox.com/boiling-point-water-d_926....

Re:Andrea Rossi has started commercializing ECAT nuclear fus... by lafar6502 on Tuesday November 26, 2013 @11:25AM (#6802258)
And nowhere near the claimed 1MW... Am I wrong or they didn't even bother to do the math properly?