Re:A Printer That Can Print a 2,500 Square Foot House in 20 ...
by toomuchtodo on Monday October 28, 2013 @03:20PM
(#6629159)
You don't even need to be a plumber to do plumbing; PVC the whole thing.
[ Parent
| on HN ]
Re:A Printer That Can Print a 2,500 Square Foot House in 20 ...
by avn2109 on Monday October 28, 2013 @04:53PM
(#6629704)
Pex pipe [1] might be a better choice than PVC because of its high pressure tolerance and the fact that it isn't brittle/prone to cracking. It does require nonstandard tools to work with though (ie. burly pipe cutters, special fittings, etc.)
But your point still stands. A master plumber might not be required for every part of every job today.
Re:A Printer That Can Print a 2,500 Square Foot House in 20 ...
by toomuchtodo on Monday October 28, 2013 @04:57PM
(#6629731)
Thanks for the correction with regards to material.
I do tech/IT by day, but have a welding certification as well. Its extremely easy to braize copper tubing together for plumbing once you've practiced, but feels like its work that isn't necessary when there are easier ways to do it (ie the pex pipe you suggested).
Coincidently, I'm replacing two toilets in my home tonight. Wish me luck!
Re:A Printer That Can Print a 2,500 Square Foot House in 20 ...
by Tloewald on Monday October 28, 2013 @08:03PM
(#6630779)
Good luck. Replacing toilets is surprisingly straightforward, just need the $2 wax ring.
Re:A Printer That Can Print a 2,500 Square Foot House in 20 ...
by toomuchtodo on Tuesday October 29, 2013 @11:47AM
(#6634985)
Thank you! It went splendidly!
Off topic: They actually advertise the toilet as being unclogable and demonstrate it by flushing a bucket of golf balls down it. Brilliant.
Re:A Printer That Can Print a 2,500 Square Foot House in 20 ...
by maxerickson on Monday October 28, 2013 @03:57PM
(#6629358)
Correct slopes and various other things to meet code are a lot harder than joints.
Re:A Printer That Can Print a 2,500 Square Foot House in 20 ...
by moocowduckquack on Monday October 28, 2013 @04:05PM
(#6629409)
Getting the angle right is easy if all the plumbing is specified as a parametric model then machine cut, getting it wrong would be more tricky.
Re:A Printer That Can Print a 2,500 Square Foot House in 20 ...
by toomuchtodo on Monday October 28, 2013 @04:00PM
(#6629376)
Still, its pretty trivial. Slopes with your level, traps in the right spots. I admit there is knowledge required, but not as much skill.