News for hackers. Stuff that matters.
Re:From China, With Love by conductor on Saturday October 19, 2013 @05:39PM (#6577975)
There are open source (Linux based) firmwares such as OpenWRT [0].

[0] - https://openwrt.org/

Re:From China, With Love by rwg on Saturday October 19, 2013 @06:06PM (#6578080)
The problem isn't a lack of software to put on hardware, it's a lack of hardware that doesn't go out of its way to thwart attempts to install different software, either intentionally or as a side-effect of being optimized for cost.

As an example of the latter, I have a Monoprice-rebadged Tenda W301A ceiling-/wall-mount AP on my desk. It only has 2 MB of flash and 16 MB of RAM. It has a TTL serial port, but the lines are broken out to surface pads that aren't even grouped together on the PCB. (They're not labelled on the silkscreen, either.) The version of u-boot it ships with is stripped down to nothing, probably because of the limited flash space available. For ≤$5 more on the BOM, these problems could be fixed, and the device would be considerably more useful.

Re:From China, With Love by conductor on Saturday October 19, 2013 @06:17PM (#6578136)
There are devices with more RAM (32MB or 64MB) and with USB port(s) where you can mount a flash drive / external disk and install anything (like Transmission, or even Samba) on it and use as a poor man's NAS. For example the TP-Link MR-3020 is pretty much hackable [0].

[0] - http://wiki.openwrt.org/toh/tp-link/tl-mr3020

Re:From China, With Love by justincormack on Sunday October 20, 2013 @06:51AM (#6579514)
There are manufacturers who have product lines designed to be reflashed eg Netgear http://www.myopenrouter.com/