News for hackers. Stuff that matters.
Re:Dropbox clone with git, ssh, EncFS and rsync.net by prirun on Tuesday October 15, 2013 @02:52PM (#6555472)
You can do this with HashBackup too (I'm the author). There are sites using HB to backup terabytes of data. One of the larger sites has 25M files they backup every day.

  1. Copy ssh public key to rsync.net server:

  [jim@mb hbdev]$ scp ~/.ssh/id_rsa.pub [email protected]:.ssh/authorized_keys
  Password:
  id_rsa.pub
			 100%  392     0.4KB/s   00:00    


  2. Create a local HashBackup backup directory:

  [jim@mb hbdev]$ hb init -c hb
  HashBackup build 1070 Copyright 2009-2013 HashBackup, LLC
  Backup directory: /Users/jim/hbdev/hb
  Permissions set for owner access only
  Created key file /Users/jim/hbdev/hb/key.conf
  Key file set to read-only
  Setting include/exclude defaults: /Users/jim/hbdev/hb/inex.conf

  VERY IMPORTANT: your backup is encrypted and can only be accessed with
  the encryption key, stored in the file:
      /Users/jim/hbdev/hb/key.conf
  You MUST make copies of this file and store them in a secure location,
  separate from your computer and backup data.  If your hard drive fails, 
  you will need this key to restore your files.  If you setup any
  remote destinations in dest.conf, that file should be copied too.

  Backup directory initialized


  3. Create a dest.conf file in the backup directory:

  [jim@mb hbdev]$ cat - >hb/dest.conf
  destname rsyncnet
  type rsync
  dir [email protected]:
  password XYZZY


  4. Enable dedup using up to 1GB of memory:

  [jim@mb hbdev]$ hb config -c hb dedup-mem 1g
  HashBackup build 1070 Copyright 2009-2013 HashBackup, LLC
  Backup directory: /Users/jim/hbdev/hb
  Current config version: 0
  Showing current config

  Set dedup-mem to 1g (was 0)


  5. Create a test file, 10 x 10k random blocks

  [jim@mb hbdev]$ dd if=/dev/urandom of=ran10k bs=10k count=1
  1+0 records in
  1+0 records out
  10240 bytes transferred in 0.001602 secs (6392272 bytes/sec)

  [jim@mb hbdev]$ cat ran10k ran10k ran10k ran10k ran10k ran10k ran10k ran10k ran10k ran10k >test100k

  [jim@mb hbdev]$ ls -l test100k
  -rw-r--r--  1 jim  staff  102400 Oct 15 14:20 test100k


  6. Backup the test file:

  [jim@mb hbdev]$ hb backup -c hb test100k
  HashBackup build 1070 Copyright 2009-2013 HashBackup, LLC
  Backup directory: /Users/jim/hbdev/hb
  Using destinations in dest.conf
  This is backup version: 0
  Dedup enabled, 0% of current, 0% of max
  /Users/jim/hbdev/test100k
  Writing archive 0.0
  Copied arc.0.0 to rsyncnet (11 KB 2s 5.0 KB/s)
  Copied hb.db.0 to rsyncnet (4.3 KB 2s 2.1 KB/s)
  Copied dest.db to rsyncnet (340 B 2s 162 B/s)

  Time: 4.8s
  Wait: 6.5s
  Checked: 5 paths, 125418 bytes, 125 KB
  Saved: 5 paths, 125418 bytes, 125 KB
  Excluded: 0
  Dupbytes: 0
  Compression: 87%, 8.1:1
  Space: 15 KB, 15 KB total
  No errors


  7. Create a different test file, with junk at the beginning, middle, and end:

  [jim@mb hbdev]$ echo abc>junk

  [jim@mb hbdev]$ cat junk test100k junk test100k junk >test200k
  [jim@mb hbdev]$ ls -l test200k
  -rw-r--r--  1 jim  staff  204812 Oct 15 14:24 test200k


  8. Backup the new file:

  [jim@mb hbdev]$ hb backup -c hb test200k
  HashBackup build 1070 Copyright 2009-2013 HashBackup, LLC
  Backup directory: /Users/jim/hbdev/hb
  Using destinations in dest.conf
  This is backup version: 1
  Dedup enabled, 0% of current, 0% of max
  /Users/jim/hbdev/test200k
  Writing archive 1.0
  Copied arc.1.0 to rsyncnet (42 KB 2s 15 KB/s)
  Copied hb.db.1 to rsyncnet (4.6 KB 1s 2.3 KB/s)
  Copied dest.db to rsyncnet (388 B 1s 207 B/s)

  Time: 3.0s
  Wait: 6.7s
  Checked: 5 paths, 227898 bytes, 227 KB
  Saved: 5 paths, 227898 bytes, 227 KB
  Excluded: 0
  Dupbytes: 122880, 122 KB, 53%
  Compression: 79%, 4.8:1
  Space: 47 KB, 62 KB total
  No errors


  9. What do the stats look like?

  [jim@mb hbdev]$ hb stats -c hb
  HashBackup build 1070 Copyright 2009-2013 HashBackup, LLC
  Backup directory: /Users/jim/hbdev/hb

		     2 completed backups
		353 KB file bytes checked since initial backup
		353 KB file bytes saved since initial backup
		    0s total backup time
		176 KB average file bytes checked per backup in last 2 backups
		176 KB average file bytes saved per backup in last 2 backups
		  100% average changed data percentage per backup in last 2 backups
		    0s average backup time for last 2 backups
		353 KB file bytes currently stored
		     2 archives
		 53 KB archive space
		 53 KB active archive bytes - 100%
		   5:1 industry standard dedup ratio
		 26 KB average archive space per backup for last 2 backups
		   6:1 reduction ratio of backed up files for last 2 backups
		6.2 MB dedup table current size
		     4 dedup table entries
		    0% dedup table utilization at current size
		     2 files
		     6 paths
		    12 blocks
		     6 unique blocks
		16,386 average variable-block length (bytes)


  10. How much space are we using on the rsync server?

  [jim@mb hbdev]$ ssh [email protected] ls -l
  total 309
  -rw-r--r--  1 XXXX  XXXX     33 Oct 15 18:22 DESTID
  -rw-r--r--  1 XXXX  XXXX  11216 Oct 15 18:22 arc.0.0
  -rw-r--r--  1 XXXX  XXXX  42416 Oct 15 18:25 arc.1.0
  -rw-r--r--  1 XXXX  XXXX    388 Oct 15 18:25 dest.db
  -rw-r--r--  1 XXXX  XXXX   4308 Oct 15 18:22 hb.db.0
  -rw-r--r--  1 XXXX  XXXX   4604 Oct 15 18:25 hb.db.1


  11. By default, HB creates a local backup too.  Delete the
      local arc files (this is the file backup data)

  [jim@mb hbdev]$ hb config -c hb cache-size-limit 0
  HashBackup build 1070 Copyright 2009-2013 HashBackup, LLC
  Backup directory: /Users/jim/hbdev/hb
  Current config version: 2
  Showing current config

  Set cache-size-limit to 0 (was -1)

  [jim@mb hbdev]$ hb backup -c hb /dev/null
  HashBackup build 1070 Copyright 2009-2013 HashBackup, LLC
  Backup directory: /Users/jim/hbdev/hb
  Using destinations in dest.conf
  This is backup version: 2
  Dedup enabled, 0% of current, 0% of max
  /dev/null
  Removing archive 2.0
  Copied hb.db.2 to rsyncnet (4.0 KB 1s 2.0 KB/s)
  Copied dest.db to rsyncnet (404 B 7s 57 B/s)

  Time: 2.5s
  Wait: 9.2s
  Checked: 3 paths, 5692 bytes, 5.6 KB
  Saved: 3 paths, 5692 bytes, 5.6 KB
  Excluded: 0
  Dupbytes: 0
  Compression: 29%, 1.4:1
  Space: 4.0 KB, 66 KB total
  No errors

  [jim@mb hbdev]$ ls -l hb
  total 30600
  -rw-r--r--  1 jim  staff       65 Oct 15 14:03 HBID
  -rw-r--r--  1 jim  staff       76 Oct 15 14:05 dest.conf
  -rw-r--r--  1 jim  staff     4096 Oct 15 14:31 dest.db
  -rw-r--r--  1 jim  staff  6291716 Oct 15 14:31 hash.db
  -rwxr-xr-x  1 jim  staff  9182624 Aug 10 09:45 hb
  -rw-r--r--  1 jim  staff   139264 Oct 15 14:31 hb.db
  -rw-r--r--  1 jim  staff     4308 Oct 15 14:22 hb.db.0
  -rw-r--r--  1 jim  staff     4604 Oct 15 14:25 hb.db.1
  -rw-r--r--  1 jim  staff     4012 Oct 15 14:31 hb.db.2
  -rw-r--r--  1 jim  staff        6 Oct 15 14:31 hb.lock
  -rw-r--r--  1 jim  staff      412 Oct 15 14:31 hb.sig
  -rw-r--r--  1 jim  staff      511 Oct 15 14:03 inex.conf
  -r--------  1 jim  staff      333 Oct 15 14:03 key.conf


  12. Mount the backup as a FUSE filesystem:

  [jim@mb hbdev]$ hb mount -c hb mnt >mount.log 2>&1 &
  [1] 62772


  13. What's in the mounted filesystem?

  [jim@mb hbdev]$ ls -l mnt
  total 8
  drwx------  1 jim  staff  1 Oct 15 14:22 2013-10-15-1422-r0
  drwx------  1 jim  staff  1 Oct 15 14:25 2013-10-15-1425-r1
  drwx------  1 jim  staff  1 Oct 15 14:31 2013-10-15-1431-r2
  drwx------  1 jim  staff  1 Oct 15 14:31 latest
  [jim@mb hbdev]$ find mnt/latest
  mnt/latest
  mnt/latest/Users
  mnt/latest/Users/jim
  mnt/latest/Users/jim/hbdev
  mnt/latest/Users/jim/hbdev/test100k
  mnt/latest/Users/jim/hbdev/test200k
  mnt/latest/dev
  mnt/latest/dev/null


  14. All file attributes are correct in the mounted filesystem:

  [jim@mb hbdev]$ ls -l mnt/latest/Users/jim/hbdev
  total 602
  -rw-r--r--  1 jim  staff  102400 Oct 15 14:20 test100k
  -rw-r--r--  1 jim  staff  204812 Oct 15 14:24 test200k

  [jim@mb hbdev]$ ls -l test*k
  -rw-r--r--  1 jim  staff  102400 Oct 15 14:20 test100k
  -rw-r--r--  1 jim  staff  204812 Oct 15 14:24 test200k


  15. Test the backup: are the remote and local files equal?

  [jim@mb hbdev]$ time cmp test100k mnt/latest/Users/jim/hbdev/test100k
  real0m2.464s
  user0m0.001s
  sys0m0.005s

  [jim@mb hbdev]$ time cmp test200k mnt/latest/Users/jim/hbdev/test200k
  real0m2.271s
  user0m0.001s
  sys0m0.004s

  [jim@mb hbdev]$ time cmp ran10k mnt/latest/Users/jim/hbdev/test100k
  cmp: EOF on ran10k
  real0m0.005s
  user0m0.001s
  sys0m0.003s

  (ran10k and remote test100k are equal for 1st 10k, which is correct)
Beta site is: http://www.hashbackup.com

There is a security doc on the site that has been reviewed by Bruce Schneier.

Re:Dropbox clone with git, ssh, EncFS and rsync.net by edwintorok on Tuesday October 15, 2013 @03:33PM (#6555757)
If someone is looking for an alternative to a closed-source product, I don't see why another closed-source product would be the answer (according to Hashbackup's FAQ it won't be open-source). Usually the goal of replacing a closed-source product is to have something that you can fully control / tweak / audit ...