News for hackers. Stuff that matters.
Re:Ask HN: I am 35 years old with no degree – can I still pr... by rouan on Monday July 01, 2013 @03:12AM (#5969195)
I think you should learn processing and arduino, possibly before starting into web. There are already a lot of web developers, and not enough visual/electronic opensource devs.

To get started download and run http://processing.org/

Paste in this code and click run. Start messing around and start learning if, while, functions etc.

--------------------------------------------

void setup() {

  size(640,480);

  background(15, 25, 25);
}

void draw() {

  stroke(255,255,125, 55); //RED, GREEN, BLUE, ALPHA 0-255

  line(320,240,mouseX, mouseY);
}

--------------------------------------------

Then with arduino, very similar environment. About $20 for a board. You can start blinking LEDs etc. Get an UNO board to start off with. File > Examples > ..

http://arduino.cc/en/

With an LED in pin 11 and Ground. Upload this code and rejoice.

--------------------------------------------

void setup() {

  pinMode(11, OUTPUT); //sets 11 to output power instead of read in
}

void loop() {

  // put your main code here, to run repeatedly: 

  digitalWrite(11, HIGH); //switches on 5Volt

  delay(200);             //waits for 0.2sec

  digitalWrite(11, LOW); //switches off gnd

  delay(100);            //waits for 0.1sec  
}

--------------------------------------------

After this I would recommend starting on nodejs/html/css since you can use processingjs to draw in your browser, nodejs can connect to arduino and allow for internet of things.

Re:Ask HN: I am 35 years old with no degree – can I still pr... by talmir on Monday July 01, 2013 @06:47AM (#5969771)
I would rather point him in the direction of a pic microcontroller, straight AVR (without the arduino middleman) or maybe even one of the cortex boards out there. Arduino has been made too "fool proof" with external libraries and hand-holding to be any more valuable for learning programming than the average hello world programming tutorial.
Re:Ask HN: I am 35 years old with no degree – can I still pr... by rouan on Monday July 01, 2013 @10:34AM (#5970885)
I respect your view, and cannot compare it to PIC as I have no experience with it. You comment makes me angry though, because I've seen this view before from others and I think it is false. Arduino has been immensely empowering tool to learn, a joy to work with and the community is incredibly helpful and supportive.

To back up this claim I am making, here is an arduino 3D printer I've developed from scratch. I mean we milled the parts we needed based off a reprap frame, I couldnt get the idiotic firmwares and code available to work so I started with an arduino and a stepper motor and figured it out.

https://github.com/fluentart/arrowprint I'm a self taught artist that got interested in code so I don't claim to be good at it, as I really have no base to compare my quality of code to others except for the end result and the process of it for me personally.

Please tell me how a pic would be better? I am eager to learn.