Two weeks ago, I spent 20 minutes with 3 KXStudio Laptops and a master KXStudio workstation, and got all the laptops acting as input slaves to pipe live instruments and mics to Ardour running on the workstation using Opus as the transferring codec. all it took was loading the network module into JACK, and making sure there was gigE/cat6 for networking. we had mp3's and FLAC's of the concert ready for the band to review before their roadies were done packing up the gear.
As for high-end hardware, the laptops are using M-Audio Fast Track Pros and 10/10's. None of the hardware goes for more than $150, and we're using ultra-cheap AMD Fusion laptop slaves sourced from alibaba with an AMD A10-based workstation as master. We're at $2800, including 3 monitors.
Because an AMD A10 with 12GB of RAM is stupid overpowered for audio production, we installed MacOS X via KVM and routed that output through JACK as well. WINE loads quite a few professional digital audio workstation packages, and a ton of VSTs, and wineasio makes them all work with JACK. Running all this emulation doesn't make the system feel sluggish at all.
the main website is http://kxstudio.sourceforge.net, but the LiveCD downloadable there is based on Ubuntu 12.04. I installed raring, added the PPA's, and then installed packages. I like bleeding edge. but the official livecd is _very_ painless to install if you're having headaches configuring.
Thanks for the link!
In case anyone is interested: I'm using them on Arch, they are available through the AUR.
* Turning off auto-respawn (from 2010, not sure if it's entirely accurate): http://www.linuxplanet.com/linuxplanet/tutorials/7130/2
* Script I used to use to get Skype and PulseAudio to play nice in the early days of PA: http://ubuntuforums.org/showthread.php?t=790889
[1] http://en.wikipedia.org/wiki/Zero_configuration_networking
> It's certainly an RTFM thing, but last time I didn't know how to get PulseAudio to go away
`pulseaudio -k`Typically when I want a quick-and-dirty "kill PulseAudio for real" solution I move /usr/bin/pulseaudio to /usr/bin/pulse-dead, issue pkill pulseaudio, and proceed until I want PA to come back to life, at which time I mv the binary back.
pasuspender paususpender while true
do
done
It's certainly an RTFM thing, but last time I didn't know how to get PulseAudio to go away. I wrote a shell script to keep killing it in a loop (since it restarts itself) long enough to get JACK to take over. I know there must be better ways...
Then inevitably once I've got JACK setup, I'll want to play some background music or watch some Flash video online without tearing down my JACK setup. Oops, does that audio player support JACK natively? Do I have that plugin installed? Can I run Pulse and have it direct output into JACK? None of this has worked smoothly in my experience.
> users of JACK generally buy high-end hardware specifically for that purpose and know what they're doing
This has not been my experience. I love to dabble, but apparently don't know what I'm doing.