Re:BeagleBone Black: A 1-GHz computer for $45
by shrikant on Friday May 03, 2013 @05:59AM
(#5649549)
I can vouch for this. I use a Blackberry wall-wart type charger for my Pi, and it's been rock solid. I only power it down it when I'm off travelling someplace for more than a day.
pi@raspberrypi ~ $ uptime
10:58:03 up 17 days, 13:45, 1 user, load average: 0.00, 0.01, 0.05
pi@raspberrypi ~ $Of course if you never plug anything in, it will stay up for a long time. The problem arises when there are things being plugged in and out.
Many USB devices don't work with the Pi. It's pretty picky.
pi@mia ~ $ uptime
15:40:15 up 94 days, 23:03, 1 user, load average: 0.00, 0.01, 0.05
In fact technically RPi model B's official spec is that it requires 700mA. You can often get away with less, but you'll definitely start to hit 500mA+ under stress and with peripherals, which is above what USB can officially supply.
Your best bet is to get a nice solid cellphone wall-wart type charger, preferably rated 2A and up. With enough juice powering the Pi, all the issues relating to USB disconnects, freezing, and ethernet dropping stop happening.
Gonna guess that the stability you're seeing with the beaglebone is just from its much lower power requirement.