News for hackers. Stuff that matters.
Re:60W equivalent LED bulb uses 9.5W and costs $13 by com2kid on Thursday April 25, 2013 @01:42PM (#5608672)
> If only someone made a "fixture" for lighting with multiple bulb sockets in a convenient, attractive mounting that could be attached to the ceiling of a room.

My condo's living room doesn't have a ceiling mounted light fixture, or a place to install one at. I'm sure the job could be done, but it'd be a major pain.

> The 60W incandescent light bulb has been the "standard lightbulb" since before most of us were born. Honestly I don't understand this criticism at all. Certainly LED lighting is available in many form factors other than a 60W bulb...

Thus I'm stuck using a stupid stand lamp, which right now is only 1 bulb. (My previous 3 bulb stand started smoking when I put in a 150W equivalent CFL, heh)

Sure 60W has been standard, but for what purpose? Just one of them is useless, and heck 3 of them isn't much better. 3 75s is actually useful, and a couple of 100s is preferred.

Re:60W equivalent LED bulb uses 9.5W and costs $13 by ajross on Thursday April 25, 2013 @03:33PM (#5609347)
Without getting into the minutiae of lumens and efficiency metrics for different lighting technologies...

It never occurred to you just to buy a second lamp?

Re:60W equivalent LED bulb uses 9.5W and costs $13 by com2kid on Thursday April 25, 2013 @04:16PM (#5609582)
> It never occurred to you just to buy a second lamp?

I'd love to. 750sqft Condo, I have one outlet that is hooked to a switch, other outlets are either in some horrid location or already used up with a power strip attached.

Not everyone has large open areas that they can just throw stuff in.

What I need to do is get a better quality standing lamp that can take a slew of light bulbs! But even then, I am not going to be going for 60W, why should I when I can go farther with fewer bulbs of a slightly higher wattage? (Or wattage equivalent in the case of LED and CFLs)

Re:60W equivalent LED bulb uses 9.5W and costs $13 by clauretano on Thursday April 25, 2013 @05:55PM (#5610164)
I feel your pain. I'm also unable to go the ceiling light route (solid concrete floors and ceilings). The best solution I've found is sticking a wireless switch on the wall next to the regular light switches. There are ones that look like a regular modern style wall switch, just thick because there are AAAs in it. The one I have is just some cheap thing that was on Amazon, but for larger-scale applications Lutron has a whole line of wireless lighting control products (Maestro).

I was surprised how bright the 100W-equivalent LED unit from Philips is. It is rated at 1780 lumens vs 1600 for an incandescent 100W.

Re:60W equivalent LED bulb uses 9.5W and costs $13 by hosh on Thursday April 25, 2013 @02:49PM (#5609115)
You might want to start thinking in terms of lumens and color temperature. So 800 lumens at 2700K. Philips make ones at higher lumens and lower (warmer) color temperatures. I have one for my one and only floor lamp and it fills up the room and still enough for reading.

Granted, I tend to prefer darker rooms anyways and I'm quite happy to have candle light in the evenings (about 100 - 200 lumens).