Re:Boston Dynamics' Petman robot successfully wears clothes
by dhughes on Friday April 05, 2013 @07:05PM
(#5501589)
Is it completely free to walk on its own or do the cables assist with balance?
[ Parent
| on HN ]
Re:Boston Dynamics' Petman robot successfully wears clothes
by WestCoastJustin on Friday April 05, 2013 @07:19PM
(#5501651)
There is a video [1] of it walking on its own. I suspect they have the cables because it was leaning over, twisting, squatting, etc and they probably want to assist with balance.
Re:Boston Dynamics' Petman robot successfully wears clothes
by bradleyland on Friday April 05, 2013 @07:40PM
(#5501740)
They're probably fall-dampening cables with very light tension. These types of cables are like rate limiters for falling objects. It would prevent it from slamming down on the floor if balance was lost, but the tension is very light; just enough to take up slack. Because they're positioned only to the sides and the rear, their greatest effect would actually be to make balance more difficult for a bipedal robot.
Re:Boston Dynamics' Petman robot successfully wears clothes
by epsylon on Saturday April 06, 2013 @05:50AM
(#5503135)
I'm pretty sure they are used to deliver power as well.
Re:Boston Dynamics' Petman robot successfully wears clothes
by bradleyland on Saturday April 06, 2013 @12:23PM
(#5504033)
The cables at the top are all for fall protection. The tether (power and control) goes through its ankle or hip area, depending on the video. The one video where you see multiple strands hanging down directly from the top are connected to a block and tackle pulley system. If you watch the one shot from behind you can see the hoist hook in the center of its shoulders up high. You can also see the tether at the hip area in the same shot.