Re:Yes `yes no`
by derleth on Wednesday March 13, 2013 @07:15PM
(#5371739)
The device file applications can use to access the first hard drive on most Linux systems. It provides raw access without filesystems or partitions.
/dev/sda1 is the first partition on that drive, /dev/sda2 the second, and so on. /dev/sdb is the next hard drive, /dev/sdc the next after that; beyond /dev/sdz, the naming scheme is apparently dependent on the hardware driver in use: Going from /dev/sdz to /dev/sdaa is what happens in the default SATA and SCSI drives, up to /dev/sdzzz, at which point you apparently run into problems. [1]
/dev/sda1 is the first partition on that drive, /dev/sda2 the second, and so on. /dev/sdb is the next hard drive, /dev/sdc the next after that; beyond /dev/sdz, the naming scheme is apparently dependent on the hardware driver in use: Going from /dev/sdz to /dev/sdaa is what happens in the default SATA and SCSI drives, up to /dev/sdzzz, at which point you apparently run into problems. [1]
http://rwmj.wordpress.com/2011/01/09/how-are-linux-drives-na...
[1] http://kerneltrap.org/mailarchive/linux-scsi/2010/9/20/68866...