Also, if you haven't used it yet, check out Py++. It takes a lot of the pain out of hand-authoring a Boost.Python code file. I'm using Py++ to automatically generate Boost.Python bindings for the C++ library FCollada. (FCollada is a library for accessing 3D modeling data exported into the .dae COLLADA format.)
Thanks for the tip about Cairo.
Also, glVertex3d, 3dv, 3f, etc are part of the standard GL API. The 'd' suffix indicates 'double', 'f' indicates 'float', 'i' indicates 'int', 's' indicates 'short', and the 'v' suffix indicates that the function accepts a pointer rather than 3 separate components passed by value. Of course, the glVertex* API has been deprecated because VBOs are far more efficient.
Just curious again, why do you use OpenGL for Anybots? Do you create simulations before building new robot prototypes?
We use OpenGL to show real-time renderings of the robot, derived from the gyros and joint angle sensors. We have an analysis tool that shows, either in real time or post-run analysis, renderings synchronized with high-speed video of the robot and scrolling strip charts of every important variable over time. I always see much more looking at slow-motion videos & renderings afterwards than looking at the real robot.
OpenGL rendering also turned out to be useful for extracting data from CAD models. Our CAD software (SolidWorks) can export STL files (a list of polygons) and we need to extract center of mass and moment of inertia and such. Doing that without visualizing it is a nightmare.
We have done dynamics simulations (using ODE), but they haven't had much predictive value.
Are you computing center of mass / moment of inertia yourself, or using a 3rd party library to do it? PhysX is free, and I believe it can do those calculations for you fairly automatically. (In PhysX, a 'scene' is composed of 'actors', and each actor is described by a set of shape descriptors. A shape descriptor can represent a box, a sphere, a capsule, a convex hull, etc. So a laptop actor could crudely be approximated with two box shape descriptors (one for the screen, one for the body) connected by a joint. Given those shape descriptors, the library calculates the actor's center of mass / moment of inertia / etc. If your CAD software simply exports a list of polygons, you'll need to decompose those into a set of convex hulls using convex hull decomposition techniques: http://codesuppository.blogspot.com/2006/04/approximate-conv... ) You also might have better luck running dynamics simulations with PhysX than with ODE. It comes with a large number of code examples to get you started: http://developer.nvidia.com/object/physx_downloads.html
http://www.cs.berkeley.edu/~jfc/mirtich/massProps.html
Maybe 80 LOC. I'm not sure why anything more complex is needed.
PhysX does seem promising.
The other reason I mentioned convex hull computation is because PhysX can only simulate dynamic actors that are composed of boxes, spheres, capsules, and convex hulls, IIRC. Arbitrary polygon meshes aren't supported for dynamic actors, because they are very difficult to simulate in realtime. So if you wanted to use PhysX for dynamics simulations, you would probably need to decompose your model into a set of convex hulls.
Good luck -- if you need any assistance with PhysX, feel free to contact me at [email protected].
(I'm just brainstorming ideas in the rest of this post; I'm not sure whether they'll work, but it's a fun problem to think about.)
Perhaps it would be useful to write your own simulator that incorporates data about how the components of the robot behave in the real world, to get a more accurate simulation. By that I mean, the problem is that the robot model has so much complexity that it's difficult to simulate accurately. So instead of creating a mathematical model for how a compressed-air actuator behaves, for example, gather real-world data about how it actually behaves in the robot, then incorporate that data into the simulator. I mean, if the robot is walking slowly on a flat surface, then its individual components behave in the same ways each time the robot takes a step forward, right? Therefore it seems like the behavior of the whole robot can be reproduced and predicted in a simulator, since the behavior of each component is known (under controlled conditions, like when the robot is walking slowly). Brute force the problem by using large amounts of real-world data, is what I'm getting at.
"Brute force the problem by using large amounts of real-world data, is what I'm getting at."
Absolutely, that is Trevor's viewpoint, and I agree. Turns out to be somewhat difficult in practice. It's hard to even know what all the parameters should be, much less do all the work necessary to tune them. And all the while, the robot itself is changing. Joints get loose; servos get replaced. It's a constant battle.
There is a feeling among hard-core robotics folks that this level of simulation is either impossible or not worth the trouble. I tend to disagree. I think we got pretty far with the Anybots simulator; we did manage to evolve a neural network that balances on the simulator, and also balances the real robot. It's definitely a 'hard' problem to get a simulator good enough to be usefully predictive.
Depending on exactly what you're trying to do, of course...
Most of the 3D stuff is performance-critical, so I typically prototype in Python and then convert to C++, which for graphics code isn't too painful. The Boost.Python interface makes it pretty easy.
Also, the Cairo graphics interface is wonderful for drawing charts, animated robot stick figures, and many other visualizations. It has a full Postscript rendering model with alpha blending.
It looks like PLT Scheme has an OpenGL binding too, though I haven't seen it used. It looks very low-level, for instance it has separate methods named: gl.Vertex3d gl.Vertex3dv gl.Vertex3f gl.Vertex3fv gl.Vertex3i gl.Vertex3iv gl.Vertex3s gl.Vertex3sv