No, it makes no physical sense. Perhaps it's a branding name, since "Mr. Zero Point Energy" doesn't flow as well.
They've published a couple papers recently in respectable journals so I think they're easily distinguished from perpetual motion.
I couldn't find the "complete power plant" you were talking about. 5 MW in a 0.5 TEU? That's 3m x 2.4m x 2.6m, which is rather small for a 5 MW plant. And rather large for something you want to drive about town in.
Especially since you still need to worry about cooling.
The closest numbers I could find was http://pesn.com/2011/01/12/9501741_Focus_Fusion_achieves_1-b... which said:
> According to the interview I did with inventor Eric Lerner back in 2005, which was featured at Slashdot, this technology could give birth to a non-polluting power plant the size of a local gas station that would quietly and safely power 4,000 homes
A "local gas station" is much bigger than 0.5 TEU, and a highly vague definition. Assuming a home consumes 2kW then that's producing 8 MW.
Any plans I can find are highly speculative. Where is the published journal article you're talking about? The only ones I can find report experimental measurements of a non-power-producing setup. Any extrapolation from that to a real-world power plant is as highly suspect as "sequencing the human genome will cure cancer within 5 years."
Anyone who sold you plans for a working 5 MW focus fusion generator is almost certainly in the same class as selling you a perpetual motion machine. The best would be "in our optimistic future, we think this might be possible", and not a serious estimate that you could use for planning purposes.
It was published in Physics of Plasmas last year and shows sufficient temperature (1.8 billion C) and confinement time for boron fusion, and also that the fusion is occurring in the confined plasmoid, not the beam, which is a necessary condition for this approach. The remaining hurdle is sufficient density. They think they can do it but we'll see.
I was not claiming that a complete working design exists, which obviously is not the case since they haven't yet achieved net-positive fusion in the lab. Nobody has managed that yet, but focus fusion's ratio of neutron count to input power compares pretty favorably with other approaches so far.
I don't think it's silly to make an informed speculation about what a power plant would look like, if the basic idea turned out to work. NIF for example has been doing a lot of that with their LIFE design, to the point of sourcing specific components.
In the case of focus fusion, most of the power is released as a pulsed beam of charged particles. You can get energy from that by aiming it through a coil, no heat engine required. The rest of the energy goes into x-rays, which can be captured photoelectrically by a foil "onion" around the reactor core. You also need some good switches, a pretty substantial capacitor bank, and cooling. When I said "not Mr. Fusion" I was meaning to imply this would definitely not be something you drive around town in.
Focus fusion certainly isn't something we can "plan" on, any more than a poker player can plan on winning a particular pot. But that doesn't mean it's not a worthwhile bet. The investment is low, the pot is really large, and the odds don't look that bad.
How much energy can you get from a pulsed beam of charged particles? What's the efficiency level? The same question applies to getting power from X-rays. Photovoltaic is what, 20% at best? Certainly X-ray isn't that efficient.
Which means 5 MW of electrical generation is going to require, what, 20 MW of input power? 500 MW? No matter what, it's going to require a lot of cooling. Enough that saying that it fits into a container doesn't make sense.
And in any case, my statement was "We don't think it's possible to get fusion power to an even smaller scale [than a large ship's diesel engines]." You said "Some of the designs are pretty small-scale", but your example is already my example of a possible valid smaller scale.
So I think this is a case of one of those arguments where we're both on the same side?
Here's a diagram showing the energy flow they expect, if things work out: http://lawrencevilleplasmaphysics.com/index.php?option=com_l...
Overall energy balance of focus fusion reactors would be somewhat marginal, nothing like the 100x to 1000x that Sandia's talking about for MagLIF.
In this diagram they mention "garage-size." The "onion" is photoelectric, not photovoltaic.
I used PV as an example because there's been a lot of work to make that efficient, and it's still only at 20% for commercially feasible cells.
Did you notice that for 5MW of electrical power production they are generating 3MW of "losses"? That's about 1,000 tons of cooling (in the wonderful units of cooling. See http://www.trane.com/COMMERCIAL/DNA/View.aspx?i=978 ).
If you air cool the system then you'll need a tower with dimensions about 14'x22'x19' ( http://www.trane.com/CPS/uploads/userfiles/chillers/coolingt... )
"One TEU represents the cargo capacity of a standard intermodal container, 20 feet (6.1 m) long and 8 feet (2.44 m) wide.[1] There is a lack of standardisation in regards to height, ranging between 4 feet 3 inches (1.30 m) and 9 feet 6 inches (2.90 m), with the most common height being 8 feet 6 inches (2.59 m)."
So just the cooling for this thing will be more than 1 shipping container in size. It certainly wouldn't fit in my (ex-) garage!
I wouldn't think that comparing to the efficiency of other technologies is really that informative. The nearest thing I can think of to extracting energy from the beam is a linear alternator, which, if the comment here is correct: http://www.physicsforums.com/showthread.php?t=254589
...can have anywhere from 80% to 95% efficiency. I haven't found anything on the efficiency of photoelectric capture of x-rays, but from what I've seen Lerner seems to think that's the least of his worries. Perhaps he'll feel differently if he gets that far!
I really don't see how extracting energy from a charged particle beam can be compared to a linear alternator. The math is quite different. For example, you only extract energy from the front part of the beam, while in a linear alternator it slows down the entire piece of metal.
This causes a problem because when you extract energy from the particles you slow them down. These are charged, so they will repel the particles coming in from behind. The better you are at extracting energy, the more the charged particles get in the way.
The http://lawrencevilleplasmaphysics.com page that you linked to, with the Sankey diagram, does itself a disservice by giving numbers accurate in some cases to 3 significant digits when the error bars are so high, or even unknown. An excess of detail, not based on experimental values, happens to be characteristic of the free energy/perpetual motion machine crowd.
BTW, I misread that chart. It puts net energy at 24.7 kJ and losses at 42kJ, which means that 5 MW electrical production will generate 8.5 MW of heat. It'll need three times as much cooling as I thought it would. The predicted overall efficiency is about the same as other power plants.
The large power plants based on oil, coal, natural gas, nuclear, etc. are thermal power stations. They use heat to convert liquid water into steam, which then drives steam turbines. These necessarily (by the laws of thermodynamics) produce a lot of waste heat. More than half of the energy used to heat the water is not turned into power at the end.
The waste heat is dumped in the large condensers of the cooling towers, which often have the characteristic hyperboloid shape because it's the most efficient form. This requires a lot of space.
So a commercial fusion system for large-scale use, if it can be built, would likely be little different than a nuclear power plant now, because it requires a big steam turbine at a large facility.
On a smaller scale, you might replace a large ship's diesel engines with electrically-driven fusion powered systems. This would reduce ship pollution and reduce the number of times it needs to refuel. (Assuming that a perfected system needs little maintenance otherwise.)
We don't think it's possible to get fusion power to an even smaller scale, other than people whose proposals and work are difficult to distinguish from a perpetual motion machine scams.
If we did have Mr. Fusion, then it would be a game changer. We would be able to have airplanes and helicopters driven by electric motors, powered by Mr. Fusion. You could probably think about the other things possible of power were essentially free. What about heaters under the sidewalks to melt the ice? I loved going to the outdoor heated pools in Iceland, heated by cheap geothermal. With free power, we would see more outdoor pools elsewhere. More people would have hothouses for growing flowers and plants in winter. Canada could become a major producer of orchids. People in Haiti wouldn't have to strip their country of trees in order to get power. And so on.
Mr. Fusion isn't going to happen, at least not soon. We'll still need transmission lines. This sets a lower limit on the cost of power. Life would be like in Iceland or the Pacific NW, where power is cheap enough that aluminum smelters relocated there for access to cheap power, or where data centers get located in the Dells for cheap power and cooling for data centers. (And where farmers use the cheap power for moving water around.)
In other words, not much different than it is now. Except with less dependency on petroleum sources and the global politics that that entails.