I'd also want a plug-in option for nighttime charging.
I think 1m2 is a very low estimate. Keep in mind I'm describing a covered bike.
I live in Massachusetts, where it should be a crime to buy solar panels, given the dearth of sun. If I lived in SoCal, Nevada, or Arizona, this project would be very workable.
Having the portability of the solar panels doesn't seem necessary if it's just a down-the-road commuter.
So if you add in the weight of the panels, and the occasional patch of cloudy days - I think it might be a bit marginal... Would you agree?
I hadn't really considered regenerative braking. I can see how it would be useful in a place like San Francisco, but I'd wonder how effective it would be in places like NY (where you need to slam on the brakes instead of just curb your speed).
I recall reading about a mine in Peru (?) that used regenerative braking on all their hauling vehicles. They were all hooked up via a quite clever bumper-car style grid. When one was going downhill, it was helping power something going uphill.
Apparently the regenerative braking in that case resulted >50% efficiency - which seemed like a very good figure to me. Do you know any figures for cars/bikes/scooters in more regular practice?
http://www.treehugger.com/files/2005/04/don_dunkees_diy.php
I imagine that in southern California or Arizona, the thing would get substantially more than a 1/2 charge during the day.
Depending on the battery chemistry, this could save a heck of a lot of battery life, even if it didn't provide enough to eliminate plugging in at night.
A 1/2 charge seems to be about 1.2kwh. The EVT is rated at 1.5kw. So you might get an hour out of that. Anything more powerful (a typical scooter will be 5-10kw) and you're taking 20,30 minutes a day - with ideal sun.
So, if anything, my previous math was conservative.
Anyway - I'm not disagreeing with the principle - just saying I think there are better ways of going about it... I'd say, just stick with the plug-in and put the solar panels on your house.
Good sun in an ideal case is around 1kw/m2. Whereas, a scooter output will be around 10kw (?).
So naturally depends on how much area you really want to invest in. But I'd say 1m2 would be the maximum for a fold-out on a scooter.
With the losses, less ideal sun, the weight of the batteries and the solar panels - not sure this would add up as a viable solution... You'd need to be charging for a day or two just to get an hour's output.
A plug-in option probably more viable.