News for hackers. Stuff that matters.
Re:Microsoft Surface Pro Teardown by Cushman on Wednesday February 13, 2013 @04:01PM (#5215637)
> We don't understand the point of heavily-glued batteries. This kind of planned obsolesce is completely unnecessary.

I dropped my iPhone 5 on a tile floor recently. Looked fine apart from a small scuff on the bevel, but the home button wasn't working. Desperately hoping it was a software problem, I powered off the phone— and then noticed that not only was it not a software problem, but the screen and all of the attached internals had actually popped out of the case and were protruding from one long edge by like half a centimeter.

Don't ask me how I missed that on a first inspection.

I carefully pressed everything back into place, turned on the phone, and it's been working fine ever since. But yeah... I could deal with some more glue.

Re:Microsoft Surface Pro Teardown by FireBeyond on Wednesday February 13, 2013 @04:24PM (#5215772)
> We don't understand the point of heavily-glued batteries. This kind of planned obsolesce is completely unnecessary.

And yet when they tore down an iPhone with its glued battery, nary a mention was mentioned of the inconvenience...

Re:Microsoft Surface Pro Teardown by vvhn on Wednesday February 13, 2013 @06:15PM (#5216362)
>And yet when they tore down an iPhone with its glued battery, nary a mention was mentioned of the inconvenience..

A huge stink was made with the Retina Macbook Pros

http://www.wired.com/gadgetlab/2012/06/opinion-apple-retina-...

http://www.reddit.com/r/IAmA/comments/v2h57/im_the_ifixit_gu...

Also, on HN http://news.ycombinator.com/item?id=4115942

Re:Microsoft Surface Pro Teardown by sp332 on Wednesday February 13, 2013 @05:02PM (#5215972)
From the iPhone 5 teardown: "The battery comes out with a bit of prying once the front panel is removed." And there are no warnings that you shouldn't remove the battery and that to replace the battery you will need a whole new back assembly.

And I guess that's ignoring the fact that phones are expected to be hard to take apart whereas iFixit complained loudly about the non-repairability of the iMac. http://www.ifixit.com/Teardown/iMac+Intel+21.5-Inch+EMC+2544...

Re:Microsoft Surface Pro Teardown by jlgreco on Wednesday February 13, 2013 @04:03PM (#5215648)
I don't know, it kind of sounds like without glue a lot of the kinetic energy from the fall was dropped into popping the phone apart. Were it not able to fail in a reversible fashion like that, there is a chance it could have broken in a worse way.

It has always seemed to me that phones with removable batteries that go flying when the phone gets dropped are likely inherently more robust for that reason. Crumple-zones for phones.

Re:Microsoft Surface Pro Teardown by Cushman on Wednesday February 13, 2013 @04:13PM (#5215709)
Yeah, I started wondering about that immediately after posting. Not curious enough to try it again, though :)
Re:Microsoft Surface Pro Teardown by sliverstorm on Wednesday February 13, 2013 @05:09PM (#5216014)
You don't have to use an epoxy that dries as hard as cement. Many glues are springy, which could absorb shock without having to come apart.
Re:Microsoft Surface Pro Teardown by joseph_cooney on Wednesday February 13, 2013 @06:22PM (#5216388)
A friend of mine had a large internal component come loose in his iPhone 5. AFAIK he hadn't dropped it or anything either (there were no marks on the outside, and he wasn't fessing up to anything). You could move the phone and feel and hear the internal component moving a few cm inside the body. It was very odd.