A thief going into your basement by hacking your garage door may not be a realistic scenario, but your garage door being hacked and used in a botnet or intercepting your traffic and injecting malware into it is very much a thing that may happen.
Re:Garage Door Spam
by anticorporate on Thursday November 19, 2026 @10:56AM
(#50561766)
Oh, I absolutely agree. I have a fair amount of confidence that no device in my home is going to be able to talk to the outside world, at least without me knowing, but that's only because of all of the ridiculous things I've done to make sure they can't - isolated networks, alternative firmwares, etc.
For the garage door opener, I haven't actually gone in to see if I can completely turn off the WiFi/BLE capabilities. If I can't, I'm still only going to allow control through the relay, but I'm considering putting the receptacle itself on a controller too so it only gets power when an open/close request is received. That'll break the manual button control, though, so I'll have to also add a new button that isn't actually directly connected but instead triggers the power-up request prior to the open request... it's a good thing I like building Rube Goldberg machines.
I wonder if you could grab a signal strength meter and then report them to FCC. You can probably find a medical device of some sort that operates on those channels and then sur them for their harmful interference, but this is a bit much
A few weeks ago, I noticed my Apollo-1 Air quality sensor was seeing some strange behavior in the basement. Home Assistant showed an unexplained temperature spike and humidity drop a little before 1am.
I managed to figure out from other sensors that nothing was actually awry (no spikes in draw of nearby devices, no telltale gas signatures of the water heater kicking on, no motion or CO2 indicating human or other large animal presence). Was the board malfunctioning? Fortunately the device has an internal temperature sensor and an ambient sensor which are separate. Logging confirms the temperature spike originated on the board, probably from the WiFi chip.
But, why?
It turns out, after inspecting the signal a bit more, than the MyQ was broadcasting so loudly between the WiFi and BLE, screaming for someone to talk to it, that my air sensor was having to increase its power to still be able to communicate over all the noise. Switching to a different channel for the crappy old downstairs AP fixed it, but still, c'mon!
I'm a little wary of connecting any sort of ingress/egress to my home to the network at all, even locally, but an honest appraisal of the basement is that smashing a window is probably a much bigger threat model than hacking the door opener. Or in other words, https://xkcd.com/538/