News for hackers. Stuff that matters.
Re:'It's offensively cheap': Solar power is quietly becoming... by MisterMower on Sunday November 08, 2026 @02:03AM (#50411062)
Are your wall outlets down under all rated to deliver 240V at 50A?

US laundry rooms and kitchens have had standardized 240V outlets for decades. They’re just sized to deliver 40A+, and that means big breakers, thick wire, and big outlets and outlet boxes.

Installing a 240V outlet that can deliver 50A anywhere on planet earth is expensive because it takes expensive materials and labor to accomplish.

Copper costs what it costs in the US, Australia or Africa. Skilled labor that builds to code is expensive in those places, too.

This is not a standardization problem. It’s a physics problem, which dictates the cost of the system and cannot be affected by government regulation.

Re:'It's offensively cheap': Solar power is quietly becoming... by skissane on Sunday November 08, 2026 @04:44AM (#50411768)
> Are your wall outlets down under all rated to deliver 240V at 50A?

A standard Australian outlet is officially 230V at 10A. (It used to be officially 240V, but the standard was changed to 230V to harmonise with the EU standard; but given both figures come with error bars, this didn't necessarily make a difference to the actual voltage coming out of the wall.)

The US standardly uses split phase, in which a single phase of a three phase supply is split into two phases 180 degrees to each other, each of which is 120V to neutral, but 240V across each other; so the heavy duty US sockets use both of the split phases. (Originally it was 110V/220V, but was gradually increased up to 120V/240V over the 20th century.)

By contrast, in Australia, split phase generally isn't used except in rural SWER (Single Wire Earth Return) installs. Houses usually either get 230V single phase, or 400V three phase (sometimes still called 415V, which is what it was under the old 240V standard). A standard 230V socket is 10A, but there are also variations designed for 15A and 20A (plus more rarely 25A and 32A).

While most Australian houses only get single phase, a decent minority get three phase to supply larger air conditioners, or for EV charger and solar-battery installs. You also sometimes get houses wired with two out of three phases, which is different from the US / rural Australian split phase, in that you are getting two phases with a 120 degree angle between them, not two phases with a 180 degree phase angle.

Re:'It's offensively cheap': Solar power is quietly becoming... by anenefan on Sunday November 08, 2026 @04:44AM (#50411770)
No - most wall outlets in home are 10 amp for every day appliances and 15 amp in limited areas ... but the wiring needs to be able to supply a lot more of course - eg a 4 x 10 amp plate is going to need more than 10 amp wiring.

However I am aware that most appliances that would use 30 - 40 amps are required to be wired in and not by way of an outlet. That's not to say that always the case, and since so much of the rural areas in my parts are single phase there's been times working around a rough country shed -- it'd be more than one outlet plus 15 plug that's melted because someone was pushing their luck with a hot welder.

I used to have an extensive book on the code two or three decades ago ... but code changes - possibly for when common sense ... doesn't. Below [1] might offer a guide as to how it's supposed to happen down under.

[1] https://cccengineering.com.au/design-memos/as-3000-explained...