News for hackers. Stuff that matters.
Re:I Built a Drone with Only One Motor [video] by mrandish on Tuesday October 20, 2026 @02:48PM (#50170875)
> For the life of me I can't find the actuators

F3P indoor planes typically use de-cased linear servos which are flat and tiny. Their control rods are made out of piano wire so thin, there's no way it would show up on video. F3P plane designers go to extremes of miniaturization and weight reduction. F3P isn't the corner of RC 3D aerobatics I play in but it's fun to look at photos of crazy F3P planes and the videos just look... wrong :-). https://www.youtube.com/watch?v=lXD6vbGVROw

Unlike the larger, more powerful rotary servos I typically use which need to be mounted near the plane's center of gravity to maintain balance, F3P esoteric, custom linears are so light they can mount them right next to surface they move. F3P seems largely Euro-centric, but there's a growing scene in NA (https://nsrca.us/index.php/flying/f3pindoorsequencesseparato...) and a sub on RCGroups https://www.rcgroups.com/indoor-pattern-f3p-373/.

These days, quads get all the attention (and blowback) but fixed wing is the OG RC. In recent years, meta-materials + SDR + open source have changed fixed wing dramatically, unlocking breakthroughs leading to some crazy extreme flight envelopes and many sub-specialties. There's dynamic soaring gliders which reach sustained speeds over 400mph from hand launch with no motor, cross country motorless gliders can go a hundred miles from launch, and long-range powered FPV (long range = >25 miles), though lately the first rule of LR-FPV Club is 'Don't talk about LR FPV Club' :-)

Personally, I find outdoor 3D aerobatics and slope soaring to both be extremely fun. Although my 3D aerobats are a bit larger than F3P (~ .8 - 1.2M), they are still very light and quite unlike most RC planes in unexpected ways. My planes can fly low, slow and so close I can just launch and catch them by hand. They are quiet, don't need much space and bother no one. Yet, unlike F3P planes, mine can fly outdoors whether in a large backyard, local park or even the beach. Heading into a hint of breeze, they can slow down until they're just stopped, hanging in the air (which looks odd), then zoom off in a blink at over 30 mph, and they keep flying in high winds that ground most RC planes (in fact, it gets even more fun if you have sufficient skill). Because they all have a thrust-to-weight ratio far above 1:1 they also have pretty insane flight envelopes enabling high-torque and high-G aerobatics far beyond the reach of any full-sized planes at airshows. Yet, they cost ~$50 in parts, take maybe 90 mins of my time to build, and can survive high-speed nosedive crashes that would turn most RC planes into confetti (the old joke in RC is they tell newbies who insist on starting with too fast and fragile of a plane, "bring a trash bag for all the pieces").

That all combines to make my corner of RC: fun, cheap, low stress and easy to start yet with endless depth to learn ever-cooler aerobatics. I love doing crazy aerobatics only 3 ft off the ground and 20 ft away yet if I 'dumb-thumb' the plane into the ground, it just bounces - or worst case it's a 5 min repair I can do on the spot while changing batteries. All thanks to cutting-edge materials, new motors, HV Lipos, and tiny servos with crazy high torque. It's also engineering-centric and nerd-friendly - so very unlike the vibe of "Your Dad's RC Plane Club." No balsa wood, gas engines or special flying field needed. My radio transmitter looks like an XBox controller yet is modular, runs open source firmware, BT connects to my phone, has SDR features and can be scripted with Lua. I learn new aerobatics with an open source 3D simulator on my laptop or in VR so I can slow down real-time as I learn.

Re:I Built a Drone with Only One Motor [video] by jacquesm on Tuesday October 20, 2026 @08:55PM (#50174767)
Fascinating comment, thank you very much. I'm in an entirely different branch of the field, a lot more practical and far less fun but I totally appreciate what you are doing. is there a good close-up picture of those linear servos? Is that like a solenoid or something more sophisticated?
Re:I Built a Drone with Only One Motor [video] by mrandish on Tuesday October 20, 2026 @09:42PM (#50175047)
Here's a 1.1g linear actuator https://www.aliexpress.us/item/3256801316383625.html. Third photo is it sitting on a fingertip. But 1.1g is heavier than ultra-micro flying guys want. They mod or assemble actuators under 1g that are smaller, stronger and faster than that one. F3P guys like Donatas are balancing weight and size against speed, torque and throw because they need high-precision and high-speed to carve those competition lines.

The motors, ESCs, servos and materials get ridiculously small and light. You can get a sense of it on this forum: https://www.rcgroups.com/scratchbuilt-indoor-and-micro-model..., though it covers a wide range of small models, some of which the hardcore would consider obese. Here's a 4.9 gram, 8.5 inch wingspan RC airplane with color LEDs :-) https://www.youtube.com/watch?v=4OKrL8o22uE