News for hackers. Stuff that matters.
Re:RepRapMicron by tliltocatl on Sunday October 18, 2026 @03:21PM (#50144361)
These aren't exactly RepRap-friendly. The piezo buzzers are too soft. For a proper multilayer piezo actuator you have to either go to Thorlabs (a bit expensive) or other manufacturers (either expensive or "don't bother us until you are ready to buy a few thousands"). AFAIR MLCC ceramic capacitors actually can make half-decent actuators, but not sure if these are suitable for precision position. Baking your own would be doable, but who wants to deal with lead? And once you got the chips, there is another problem: how do you couple it to a plastic flexture? "Adult" stuff uses wire-EDM-cut metal flextures. While not completely impossible to DIY, wire-EDM a whole undertaking in itself, and an expensive one.

Piezos are sure the way to go for a fab-in-a-shed youtuber, but not yet for those who want to make it reproducible by others.

Re:RepRapMicron by Joel_Mckay on Sunday October 18, 2026 @04:24PM (#50145135)
One may buy the +-0.28mm piezoelectric actuator stacks out of China for $15, but the high-voltage drivers are not amateur friendly. =3
Re:RepRapMicron by tliltocatl on Monday October 19, 2026 @02:14PM (#50155854)
Really? I was under impression 100µm is state of art.
Re:RepRapMicron by Joel_Mckay on Monday October 19, 2026 @04:24PM (#50157586)
Who knows what was inside the box for sure... ymmv. At the time, we ended up going with a vacuum rated kit (https://nanomotion.com/ .) =3
Re:RepRapMicron by gsliepen on Monday October 19, 2026 @04:27AM (#50149792)
I've worked with piezo actuators to align optical elements. They have great resolution, but they suffer from non-linearity, non-repeatability and a lot of hysteresis. Making motion accurate then becomes a problem of having encoders that can measure the position of your device with the required accuracy.