And I usually refer to the "IP KVMs" as a "lights-out" module/engine as I was familiar with HP's "ilo (integrated lights out) [0]. More on lights out management on Wikipedia: https://en.wikipedia.org/wiki/Out-of-band_management
I was thinking of making my own with an ESP32 + serial, as that's enough in theory, though I am unsure how well-supported serial ports are in BIOS and bootloader. Also, IIRC RS232 is ±12V, so the ESP would need a level shifter.
TFA's device looks cheap enough (well, depending on shipping to EU), I may just get one. The screen is a bit superfluous though, and I think that the ATX power button support is a must.
I expected that kind of potato IP-KVMs to surface from crypto mining space, but alas, what we got was this thing which predecessor have reputation of crashing. That might not be stupid, but a bit frustrating.
How? I and many other have been using it for years without problems.
> it is absolutely not lower latency than the gpu's native display output.
and subsequent encode
Note that if anti-cheat is a concern, common dev boards like Arduino Leonardo and Pi Pico could also trigger flagging, so maybe that needs to be done slightly differently too(assuming the intent is good and this don't count towards anti-cheat evading in whatever you're doing).
As for dev boards, it wouldn't ever show up as a dev board to the PC, it would simply be simulating a dumb hardware keyboard. That's one of the reasons I wanted the board itself to have its own wired network.
Pretty much any off-the-shelf SBC can present itself as a USB HID device like a keyboard. You can buy a very capable rp2040-based board for <$5.
What part of this equation requires expensive hardware?
In that case the path of least resistance becomes something like a $22 NanoPi NEO (has onboard ethernet, widely used in PiKVM setups)
Maybe I'll look into that, wouldn't require messing around with the picoprobe. Thanks!
For high refresh 4K you also need HDMI 2.1 or DisplayPort with DSC support, and a lot of "4K" KVMs don't have it.
Also, 1080p divides evenly into 4K, so turn on integer scaling in the Nvidia or AMD settings and 1080p will look sharp instead of blurry.
An annoying quirk is that I have to use the Nvidia control panel specifically to get Windows to send a 1080p signal as otherwise, it will just upscale 1080p to a 4K signal. It makes no fucking sense to me why that would be the default but whatever.
I agree that it's insane it works this way though.
I looked at making a solution myself, but for some reason, simulating a USB client device in software is extremely annoying, and requires specialized hardware that is also very expensive. So at that point, why not just get a KVM...
I frequently switch between 1080p and 4K for gaming since I don't like resampling artifacts. Never found a KVM that can handle 4K properly even for productivity. The mistake can be as basic as assuming a 100% scale factor.