I know that some modern iOS devices actually require a specific voltage across the data lines to tell the device what wattage charger it's using. In that situation you would have to add a couple of resistors to the charging cable between the voltage and data pins, which definitely makes it a lot more difficult for most people.
You might find the following interesting: http://www.ladyada.net/make/mintyboost/icharge.html
You're right -- as an Android user, I was thinking about the USB 3.0 charging standard (and the pre-standard behavior which led to it), which Android devices generally follow.
If you have an iDevice, you have more work to do.
Re:Beware of Juice-Jacking
by raverbashing on Friday December 21, 2012 @05:21AM
(#4952184)
Do you need to short the data end at the device? Probably not
It may make sense to not leave them "floating", not sure how chargers do (I mean, not considering the ones that do some electric tricks for the device to recognize their "vendor extensions")
If you want a standards-compliant 'fast charge', you need to short the data lines to the device. If you merely cut the data lines, I don't know what the device will do. Probably it will draw 100mA, which is the permissible draw for a USB device that hasn't connected to the host yet, and then it will repeatedly try and fail to connect.
Just be careful not to plug the resulting cable into a computer -- you are likely to draw more current than permitted by the USB spec, and could potentially cause an issue.
(I suppose you could potentially cause an issue with a charging kiosk too, if it's a computer rather than a dumb brick, but it's not really the kiosk I'm worried about.)