News for hackers. Stuff that matters.
Re:How to Destroy an Arduino by dfox on Saturday December 08, 2012 @05:01PM (#4892839)
One thing that always bugged me about $30 arduino is that it is mostly nothing else than $2.50 AVR
Re:How to Destroy an Arduino by jrockway on Saturday December 08, 2012 @05:11PM (#4892862)
And a crystal, header blocks, USB port, voltage regulator, power jack, and some other small components. Not to mention shipping cost, etching the PCBs, drilling the PCBs, the cost to buy the pick-and-place machine and reflow machine, QA, maintaining the website, ...

You can certainly have AVR applications that cost less than $20, but there is a fair amount of cost in producing a development board. (You say $30 but there are plenty of sub-$20 Arduino clones.)

Re:How to Destroy an Arduino by mbell on Saturday December 08, 2012 @05:52PM (#4892994)
> etching the PCBs, drilling the PCBs, the cost to buy the pick-and-place machine and reflow machine

Your correct on the cost of the headers/ports being much higher than most would think (certainly higher than the AVR).

However, the arduino products are not even close to being in the ball park of volume needed to purchase their own PCB manufacturing equipment, nor P&P, nor reflow, nor QA systems. Its all outsourced, probably through multiple layers (they list SparkFun as a manufacturer and I can almost guarantee they aren't doing any of the actual manufacturing either).

Re:How to Destroy an Arduino by jrockway on Saturday December 08, 2012 @06:35PM (#4893122)
Somebody bought the equipment and they're probably not letting people use it for free, that's all I'm saying.

Sparkfun owns a pick and place machine:

http://www.youtube.com/watch?v=tn0EKtLOVx4

Presumably they're doing the reflow there too. No idea about the PCB manufacturing.

Adafruit is even smaller, I think, and they do their own QA:

http://learn.adafruit.com/how-to-make-a-pogo-pin-test-jig

Re:How to Destroy an Arduino by mbell on Saturday December 08, 2012 @09:24PM (#4893523)
That would explain the cost (that is a really slow pick and place). For comparison I designed a board a few years ago that was a 6" by 8", 4 layer PCB, parts on both sides, 163 parts, several orders of magnitude more complex than an Arduino. For 1,000 unit runs the the per unit costs were $2.97 for the PCB and assembly with flying probe test was $3.51, including post processing for several parts that were not reflowable, done in Asia by a contract manufacturer.
Re:How to Destroy an Arduino by jrockway on Saturday December 08, 2012 @11:11PM (#4893750)
Yes, Sparkfun's products are definitely overpriced. They sell a constant-current LED driver for $50 that has a ~$8 parts cost at single-unit quantities. Even when I hand-solder the circuit on to a $10 Dangerous Prototypes surface-mount prototyping board at my normal hourly rate, I still come out ahead.

I still contend that the Arduino is approximately decently priced when you consider that Arduinos are popular enough to not be put together by hand but niche enough to not be made by the millions at Foxconn.

Re:How to Destroy an Arduino by mercuryrising on Sunday December 09, 2012 @01:17AM (#4894012)
I think you should look at this blog post:

http://www.bunniestudios.com/blog/?p=2407

It's a tour of the Arduino PCB manufacturing facility, with QA systems, and PCB manufacturing equipment.

He alludes to sending the stack of PCBs to the SMT facility, although he doesn't have a tour of that one on his site.

Re:How to Destroy an Arduino by mbell on Sunday December 09, 2012 @07:50PM (#4896870)
Maybe I'm missing something but that blog is a tour of System Electronica, a 3rd party contract PCB manufacturer, not an Arduino owned factory.
Re:How to Destroy an Arduino by pravda on Saturday December 08, 2012 @05:19PM (#4892892)
That's actually the nice thing about it. After you've designed and debugged your project on the Arduino board, you can implement it with a $2.50 AVR (+ a few support items).

You can't do that with, for example, the Raspberry PI or the Netduino.

Re:How to Destroy an Arduino by dfox on Saturday December 08, 2012 @05:37PM (#4892941)
That makes sense, but what doesn't is incredible amount of projects and things (and not only DIY, I've seen some one of commercial designs done exactly in this way) that just embeds whole arduino board connected by bunch of random wires to something (preferably something composed of another relatively expensive breakout boards).
Re:How to Destroy an Arduino by ComputerGuru on Saturday December 08, 2012 @09:06PM (#4893492)
For one-off projects, the 25 extra bucks aren't really the killer. I don't see the problem with using an arduino in a commercial setting, so long as you're not mass-producing with said arduino.
Re:How to Destroy an Arduino by jauer on Saturday December 08, 2012 @09:28PM (#4893539)
It isn't $2.50 but you can get a chip running .NETMF/netduino (no carrier board etc) for under $16: http://www.ghielectronics.com/catalog/product/117
Re:How to Destroy an Arduino by noonespecial on Saturday December 08, 2012 @07:22PM (#4893257)
You missed the good part. You can replace the 'CPU' on your $30 mainboard for less than $3. That's why I like the socketed versions.
Re:How to Destroy an Arduino by jrockway on Saturday December 08, 2012 @11:15PM (#4893758)
You can even replace it on the SMT versions; just buy some ChipQuik solder and be sure to apply a healthy amount of flux.