I wonder why they need tree motors per axle.
For the AMG GT4 there will be 3 motors: two at the rear, and one at the front.
My interpretation (and my German's pretty lousy) is that each motor is combined with a gear system in a single package, and they're calling the overall package (motor plus gears) a High Performance Electric Drive Unit (HP.EDU).
The two rear motors will probably be independent, so no need for a mechanical rear diff (it'll be electronically controlled).
There's no mention of a front diff, so it's unknown whether that's built into the front HP.EDU or is a separate mechanical diff).
What would it mean to "turn off" traction control in a car with independent motors per wheel? (OK this is a 3-motor/4-wheel scenario, but hypothetically…)
With software control and independent motors, we're likely to see increases in low-traction capability (for the right price-point and probably aimed at particular buyers)
With separate front and rear electric motors, there's no center differential to worry about, and a sufficiently sophisticated motor control system can make it behave well on and off road.
Then there's braking. More driven wheels means more braking energy that can be recouped via regen. In traditionally rwd cars you lose out here because braking energy tends to be directed forward.
Also there's packaging. One large motor might impinge on the cabin.
Also you get benefits wrt mass production.
A smaller motor is easier to handle. Potentially could avoid the need for high voltage cables. Which eases repair.
> In contrast to conventional radial flux motors, the electromagnetic flux in an axial flux motor runs parallel to the axis of rotation. The key components are arranged in a disc‑shaped layout: two rotors sandwich the stator from the left and right. This design enables an especially compact motor architecture, high power and torque density, and new freedoms in drivetrain packaging. In the new Mercedes‑AMG GT 4‑Door Coupe, the motor at the front axle is just under nine centimetres wide; the two motors at the rear axle each measure around eight centimetres in width. The three axial flux motors are integrated per axle into so‑called High Performance Electric Drive Units (HP.EDU), where they are combined with a compact input planetary gearbox in a single housing.