News for hackers. Stuff that matters.
Re:Show HN: WhatCable, a tiny menu bar app for inspecting US... by aquir on Friday May 01, 2026 @06:06AM (#47972979)
Good stuff, but it's telling me that my USB-C Thunderbolt cable has been plugged in upside down but the connector handled this. I was not aware that you can plug in something into USB-C upside down!
Re:Show HN: WhatCable, a tiny menu bar app for inspecting US... by justusthane on Friday May 01, 2026 @06:30AM (#47973122)
I wasn't either (insomuch as I had never thought about it), but it makes sense if you think about it for a second. If you have one end plugged in one way, and the other end plugged in the other way, each individual wire is flipped from where it should be. The fact that you _can_ plug it in either way means that the device on one end needs to be capable of recognizing that and logically reversing it. Same as automatic crossover in Ethernet.

That's all the program is telling you. It doesn't matter that it's backwards, but technically it is.

Re:Show HN: WhatCable, a tiny menu bar app for inspecting US... by regularfry on Friday May 01, 2026 @06:54AM (#47973267)
It's not always the case that the cable will correctly fix it. I think (hope?) any that any which didn't would be out of spec, but they exist...
Re:Show HN: WhatCable, a tiny menu bar app for inspecting US... by justusthane on Friday May 01, 2026 @08:33AM (#47974050)
It's the cable that is supposed to reverse itself and not the device? I'm not entirely sure I buy that - seems like it would add a lot of unnecessary complexity to every cable.
Re:Show HN: WhatCable, a tiny menu bar app for inspecting US... by nhecker on Friday May 01, 2026 @11:12AM (#47975748)
The terminating device(s) are the ones that do the flipping, not the cable. You can take a cable that works either way between two high-end device, and then connect it to at least one low-end device and it will fail to connect for one of the two orientations.
Re:Show HN: WhatCable, a tiny menu bar app for inspecting US... by jrmg on Friday May 01, 2026 @08:33AM (#47974048)
What does it mean to be ‘upside down’ if the connector handles both orientations?
Re:Show HN: WhatCable, a tiny menu bar app for inspecting US... by hurfdurf on Friday May 01, 2026 @12:18PM (#47976530)
Re:Show HN: WhatCable, a tiny menu bar app for inspecting US... by sleepingNomad on Friday May 01, 2026 @08:40AM (#47974108)
This has been fixed now, apologies.
Re:Show HN: WhatCable, a tiny menu bar app for inspecting US... by bloggie on Friday May 01, 2026 @12:47PM (#47976953)
This is actually one of the cost adders of USB3 USB-C devices. They need lane swapping ICs which are basically high speed analogue switches.
Re:Show HN: WhatCable, a tiny menu bar app for inspecting US... by globular-toast on Saturday May 02, 2026 @03:15AM (#47984111)
You can't. This software is leaking implementation details of USB-C and you really don't need to know this. I understand it's tempting to show everything, but the author should have exercised restraint here (this is assuming they were consciously involved at all, of course).