Re:Umbrella Stand Hack with Rain Alert
by jgrahamc on Tuesday November 13, 2012 @11:15AM
(#4778714)
Well, his whole thing is over engineered. He doesn't need a PIR sensor (the LEDs can just be on all the time), he doesn't need RGB addressable LEDs (he can just connect an LED to a GPIO port with a resistor). He also doesn't need a computer with the power to handle a web server.
So, what you need is a machine that has WiFi connectivity plus GPIO plus a few components. I'd suggest that you can do this with a Raspberry Pi plus a small WiFi adapter.
Using Amazon.co.uk pricing:
Raspberry Pi Model B: £42.89
Raspberry Pi Power Supply: £3.95
Edimax WiFi Adapter: £8.15
Some LEDs + resistors (est.) £2.00
----------------------------------
£56.99
Which is $90. Of course, if you have any of these things (like an old USB WiFi adapter) you can cut the cost further. Or you can do as I do (see link above) and reuse old equipment. My bus monitoring project was done for the cost of the LED display from SparkFun ($12.95).
And the Pi has a lot of power to do other stuff. I have other ambient stuff in my house running off a single Raspberry Pi plus it's doing CCTV motion detection as well.
It's a low-power WiFi client with a bunch of IO that you can configure to periodically do a TCP call to some server you own to get orders on what to do. If you don't mind having it always on you can invert that and have the server initiate the call. You lose the ultra-low power usage in that case. I've been evaluating it to create sensor/actuator networks and it's been great so far. It also has a serial port so your display example would work as well.
It's amazing that a full computer (the raspberrypi) can come so close to this on price but the raspberry is an energy guzzler compared to this and for anything you want to battery power that's a big deal.
Re:Umbrella Stand Hack with Rain Alert
by calinet6 on Tuesday November 13, 2012 @09:37AM
(#4778155)
I just want to say, that's a gross overgeneralization. I happen to enjoy rain, and don't believe in umbrellas. I tend to look at people running around in the rain with a sense of curiosity, perplexed at the idea that this fundamental element of life could somehow hurt them; as though it were not an awakening of life—a dance of life upon the dust—springing from the sky.
Re:Umbrella Stand Hack with Rain Alert
by RickHull on Tuesday November 13, 2012 @10:38AM
(#4778499)
If it's cold out and you're wearing cotton, you're going to have a bad time. If your socks get soaked inside your boots and social conventions do not allow you to remove them, you're going to have a bad time. If you need to travel more than a mile and cannot afford the luxury of a car, you're going to have a bad time.
Re:Umbrella Stand Hack with Rain Alert
by RyanMcGreal on Tuesday November 13, 2012 @10:28AM
(#4778441)
Easy for you to say - you're not made of icing sugar.
Seriously, though, I have a compact umbrella that fits nicely inside my backpack. I leave it there all the time, so I don't have to worry about whether it's going to rain.
Re:Umbrella Stand Hack with Rain Alert
by philbarr on Tuesday November 13, 2012 @11:34AM
(#4778814)
You clearly are not a dog walker. Us dog walkers get pretty tired of getting wet all the time, and trying to dry off a wet dog insistent on shaking his soggy hair all over you is extra motivation to make that last 100 yard sprint home when you see a downpour coming...
The wireless card is 50GBP+VAT and the board it plugs in to is 20. thats > $150 to control an LED wirelessly which is only a little bit insane.
I'd love to throw together little 'internet of things' projects here there and everywhere but the per-unit cost just doesn't allow it.
So, what you need is a machine that has WiFi connectivity plus GPIO plus a few components. I'd suggest that you can do this with a Raspberry Pi plus a small WiFi adapter.
Using Amazon.co.uk pricing:
Which is $90. Of course, if you have any of these things (like an old USB WiFi adapter) you can cut the cost further. Or you can do as I do (see link above) and reuse old equipment. My bus monitoring project was done for the cost of the LED display from SparkFun ($12.95).And the Pi has a lot of power to do other stuff. I have other ambient stuff in my house running off a single Raspberry Pi plus it's doing CCTV motion detection as well.
https://www.sparkfun.com/products/10822
It's a low-power WiFi client with a bunch of IO that you can configure to periodically do a TCP call to some server you own to get orders on what to do. If you don't mind having it always on you can invert that and have the server initiate the call. You lose the ultra-low power usage in that case. I've been evaluating it to create sensor/actuator networks and it's been great so far. It also has a serial port so your display example would work as well.
It's amazing that a full computer (the raspberrypi) can come so close to this on price but the raspberry is an energy guzzler compared to this and for anything you want to battery power that's a big deal.
Alternatively, you could bring an umbrella.
When you do, it's frustrating in many ways.
Seriously, though, I have a compact umbrella that fits nicely inside my backpack. I leave it there all the time, so I don't have to worry about whether it's going to rain.