News for hackers. Stuff that matters.
Re:An open-source 240-antenna array to bounce signals off th... by manuelmenzella on Monday April 06, 2026 @07:54AM (#47659735)
It says it’s open source but I can’t find a link to a repository. Am I missing something?
Re:An open-source 240-antenna array to bounce signals off th... by xkbear89 on Monday April 06, 2026 @08:41AM (#47660171)
You are not missing it -- it does not seem to be published yet. The site says open source but from the updates page it looks like the hardware design files and SDR software will ship alongside the physical product when it launches. This is pretty common with open-source hardware projects: the design is open but the repo appears after the first production run, partly because the schematics and firmware are still being iterated on and partly because publishing incomplete designs invites issues before the team is ready to support them.

What I find more interesting than the license question is the software side. They mention a pre-loaded SD card with SDR applications, which probably means GNU Radio or something built on top of it. If they release the beamforming DSP pipeline as open source, that is genuinely valuable -- most phased array signal processing code is locked behind defense contractor NDAs. Having a reference implementation that people can study and modify on commodity hardware at the 399 dollar price point would be a significant contribution to the SDR community regardless of when the repo goes live.

Re:An open-source 240-antenna array to bounce signals off th... by mrtnmcc on Monday April 06, 2026 @12:30PM (#47663106)
the licensing of the software/firmware/hardware is shown at https://moonrf.com/updates/#faq
Re:An open-source 240-antenna array to bounce signals off th... by minetest2048 on Tuesday April 07, 2026 @02:06AM (#47671271)
unfortunately the FPGA verilog source code isn't open source.. and I can't see any RF block diagram in the website

Some more questions because the website isn't clear:

- does the FPGA handle digital beamforming in the FPGA fabric? or it controls RF phase shifters for analog beamforming?

- will we have access to FPGA pin constraint file so we can write our own verilog

- can I get IQ samples from the antenna elements and run my own beamforming algorithm / calibration in a separate PC with possible GPU acceleration? or it will be bottlenecked by rpi5 gigabit ethernet?

Re:An open-source 240-antenna array to bounce signals off th... by mrtnmcc on Tuesday April 07, 2026 @12:48PM (#47678111)
Yes the FPGA does digital beamforming and there will be published FPGA pin constraint files so you can write your own Verilog.

For IQ samples, you can stream a continuous 60 MSPS IQ beam over the Ethernet, but for custom beamforming algorithms, the processing needs to be distributed across the FPGAs (for MoonRF it is a SERDES daisy chain, using the same FFC connectors as the links to the RPi-5).

Yes I'll put some newer block diagrams on the website this week. Thanks for the reminder.

Re:An open-source 240-antenna array to bounce signals off th... by minetest2048 on Tuesday April 07, 2026 @04:59PM (#47681299)
Sounds good! Hopefully i can buy one and play around with it