That is to say, how good is “good enough” when done at small-scale in developing nations or medically underserved communities?
2. Let‘s say the practice does it in old way, with impressions - no intraoral scanner. The scanner of impressions still needed, but it can be cheaper. Someone needs to build it and achieve required accuracy (let’s say, 50 μm). Who? Why? Failure mode: bad scan leads to aligners not fitting your teeth from day 1. Oops.
3. Let‘s say someone builds a good OSS alternative to OrthoCAD (Who? Why?), so that orthodontist on site could build a treatment plan and export it into series of 3D models for printers. Failure mode: good treatment plans are rarely possible or output is garbage (aligners do not fit, cause pain etc)
4. Maybe some company develops good plastic or patent expires, so that it is possible to produce it in India, China or other inexpensive location with strong industrial base. That would be cool, otherwise: non-compliant plastic breaks in patient’s mouth, decomposes with patient ingesting some toxic chemicals or is simply not strong enough to move teeth in desired position, so you have problem with 2nd aligner.
5. Maybe you get to this point, but you still need a printer that can maintain the same precision in printing. And you need a good cutting and finishing process. Someone needs to build such device. Failure modes are similar to the mentioned above.
6. The ortho supervision sounds easy, but how many patients in developing countries do even have a possibility to see orthodontist? They are definitely not in position to treat themselves.
So, in this process, what is good enough exactly? Who and why would drive the costs down while building an on-site solution?
They were a company theoretically doing the same thing with still more resources than an average individual has, and ruined people's bites and teeth.
I don't think there's a good enough here
1. A treatment plan: simulated movement of teeth at every step, taking into account all forces. That’s specialized software or external lab service.
2. Precision. You put too much pressure at the wrong angle and you will need a surgery to fix the damage, because the tooth root moved in wrong direction.
3. Plastic. You cannot use ordinary 3D printer ink. You need a plastic that can survive the chemical environment in your mouth, maintain the pressure, and you probably want it to look good (no discoloration etc).
4. Finish: Align Tech, Straumann etc do not stop after 3D printing, there are few other steps involved to make sure there’s no sharp edges etc.
5. Maybe you will need attachments (to focus pressure in the right direction on certain teeth) or wires.
Align Tech is Apple of clear aligners, but now competition exists, producing aligners at scale is commercially more efficient, considering all the risks and required qualifications, and of course the best materials for aligners are patented and not sold OTC to everyone.
Disclosure: I worked at Align 10 years ago and later was CTO of European DTC competitor.