It's always interesting in audio (or lab/automation) how you want to filter out noise (isolated ground, etc.), but naive ways of doing that can cause serious problems.
Re:Wiring a Generator to Your House
by phasetransition on Friday November 02, 2012 @07:09PM
(#4735219)
Yes, naive ways cause big problems. While I've seen people do many ill-advised things in home and studio audio, professional concert audio is decidedly more buttoned down:
Grounding is not isolated, but NEC-compliant star grounded (See NEC 400.8, 520, 525, 530 (movies), and 640 (carnivals) )
Loop area is actively minimized
Signal transmission is via instrumentation amplifier topology (i.e. differential)
Shielding is designed to minimize shield current induced noise (SCIN)
These Rane tech notes gives a good overview on some of the topics above: http://www.rane.com/note165.html http://www.rane.com/note166.html
The AES standard for audio interconnects is here: http://www.aes.org/publications/standards/search.cfm?docID=4...
Two clarifications on the article: 1. A L15-30 is a three phase delta twistlock connector. The author means the L14-30.
2. "For example, if your ground wiring is not done properly, you may inadvertently put 200+ volts on 120 volt lines, immediately frying bulbs and electronics connected to those lines, and potentially starting fires." - What the author means to refer to here is accident lifting of the neutral connection. See this excellent thread (complete with demonstration video) on the professional sound forum:
http://soundforums.net/lighting-electrical/4812-why-open-neu...
If you're interested in a general understanding of generators and grounding, you can read a post of mine, also on the professional audio forum:
http://soundforums.net/lighting-electrical/5216-running-gene...
If you've got any specific questions on the topic of generators, I'm happy to give them a go.