The ridiculously dramatic drop in power we dedicate to lighting is one that is just tough for folks to internalize. As you said, used to, you could have ~10 lights in your house that would add to upwards of 1kw. Nowadays, you can have 50 lights and barely hit 500w. Just mind blowing how far we dropped energy on those.

Same goes for televisions. Your modern TV is probably closer to the basic light bulbs before LEDs.

I'm assuming the general trend is true for all things solid state. That said, lighting is by far the biggest drop for most houses. Remarkably so.

> I'm assuming the general trend is true for all things solid state. That said, lighting is by far the biggest drop for most houses. Remarkably so.

For commercial and industrial installations, VFDs have probably been the biggest efficiency gain, even moreso than lighting. Half of all electricity consumed is used by motors. Thank goodness for solid state power electronics!

I turn LED lights off because of the difference in operational life, and I don't like changing bulbs. M GE bulbs say they have a rated lifetime of 13 years......at 3 hours of usage per day. So if they don't get turned off, then that 3 hours can very easily become 12, and now you are at a rated lifetime of ~4 years instead.

But now you’re using up switch cycles!!!

A ‘standard’ (A19 shape, E26 base) 8W 800 lumen LED lamp costs around $5 and will use about $20 of energy over a 15,000 hour lifespan, assuming $0.15/kWh.

That works out to around $0.035 per day for the lifespan of the lamp if you run it constantly for 24 hours a day, I wouldn’t waste time thinking about it. It’s an extra $10 over 12 years, you’re still using the energy.

Investing in occupancy or vacancy sensor wall switches at $25 a piece would be the best option, then you don’t need to remember to turn the lights off!

It's not a cost thing, I just don't like changing bulbs. I find it annoying, and with enough bulbs, when the lifetime is down to 4 years, you are doing one every few months on average.

But yes, I have thought about presence sensors. I'd really only need 3-4 to cover the primary areas where lights get turned on and not off (if I don't do it). I just haven't gotten around to it

Yup. In my experience, average non-nerd folk very very little feel for this stuff. I suspect some believe energy consumption of phone vs car is basically a toss up.