Re:DIY NAS: 2026 Edition
by DeathArrow on Thursday November 27, 2025 @01:21AM
(#46066305)
I wonder how many consumer level HDDs in RAID5 will take to saturate a 10Gbps connection. My napkin math says that from 1,250 MB/s we can achieve around 1,150 MB/s due to network overhead so it means about 5 Red Pro/ Ironwolf Pro (reading at about 250–260 MB/s each) in RAID5 to saturate the connection.
[ Parent
| on HN ]
I though raid5 is highly discouraged
I can't remember the details, but was that not specifically for hardware raid controllers? 2000s style.
I think for home use with MDADM or raid z2 on zfs it's just gucci. It's cost effective.
Z2 means you'll have two parity disks, like in RAID-6. That should be okay. The trouble with RAID-5 are the rebuild times that rise to multiple days with modern disk sizes. The duration of time you run effectively without redundancy grows uncomfortably large. Especially if you don't have a hot or even cold spare around.
Ah yes, I mixed up raid5 and 6.
I think it's still fine for casual home setups. Depending on data and backup strategy.
Only if you need high availability, which is probably not the case for home use.
If one of your drives fails under RAID5, before you even order a new disk, you should do an incremental backup, so that your backup is up to date. Then it doesn't really matter that the rebuild times take long. And if you have more data coming in, just do more incremental backups during the rebuild time.