It seems to be a Radeon VII on an Mi50 board, which should technically work. It immediately hangs the first time an OpenCL kernel is run, and doesn't come back up until I reboot. It's possible my issues are due to Mesa or driver config, but I'd strongly recommend buying one to test before going all in.
There are a lot of cheap SXM2 V100s and adapter boards out now, which should perform very well. The adapters unfortunately weren't available when I bought my hardware, or I would have scooped up several.
The 32gb v100s with heatsink are like $600 each, so that would be $1500 or so for a one-off 64gb gpu that is less overall performant than a single 3090.
To use the second pair of pcie slots, you _must_ have two cpus installed. Just saying in case someone finds a board with just one cpu socket populated.
I'm thinking about a low budget system, which will be using
1.X99 D8 MAX LGA2011-3 Motherboard - It has 4 pcie 3.0 x16 slots, dual cpu socket. They are priced around $260 with both the cpu
2. 4X AMD MI50 32G cards - They are old now, but they have 32 gigs of vram and also can be sources at $110 each
The whole setup would not cost more than $1000, is it a right build ? or something more performant can be built within this budget ?