News for hackers. Stuff that matters.
Re:DIY quest for a 6 watt high-end desktop computer by polshaw on Sunday September 09, 2012 @12:22PM (#4496135)
whilst it is an impressive job, the title is misleading; it's 6W idle.. 75W load.
Re:DIY quest for a 6 watt high-end desktop computer by mmphosis on Sunday September 09, 2012 @04:22PM (#4496863)
I agree, the title is misleading. And, I see a big fan on the board.

The "low-end" Raspberry Pi, not including the monitor, draws a maximum of 3.5 Watts = 5 Volts DC x 0.7 Amps

http://www.raspberrypi.org/phpBB3/viewtopic.php?f=2&t=50...

And, RPI doesn't have a fan.

Re:DIY quest for a 6 watt high-end desktop computer by archangel_one on Sunday September 09, 2012 @05:39PM (#4497093)
The fan looks to have been replaced in a later picture.

I've got a RPi here which is doing sterling service for several tasks, but it certainly wouldn't be satisfactory for desktop use like he appears to want - that machine is a Core i5, the two are lightyears apart! Plus the convenience factor - the RPi won't power USB devices that want more than a minimal amount of juice (an external 2.5" HDD, for example) whereas this machine could happily drive them at a temporarily increased power draw.

Re:DIY quest for a 6 watt high-end desktop computer by ck2 on Sunday September 09, 2012 @01:02PM (#4496248)
But it would spend a very tiny amount of time at full load?

My i3 desktop is almost always at a low of 80watts (with monitor, router, cablemodem, UPS) - full load at 150watts only happens when I fire up something with graphics (early model without GPU acceleration) and even then settles down.