in order to have public ipv6 on starlink you need to manage the /56 they delegate to you into however many /64s that is (at least 8); i tested it with a store bought router, everything worked if you can do PD with DHCP[v6] or whatever. I returned the router because it was $200 and i will eventually figure it out on a VM.
It's pretty simple with systemd-networkd:
# On the upstream network.
[Network]
DHCP=yes
[DHCPv6]
PrefixDelegationHint=::/56
# On each downstream network.
[Network]
IPv6SendRA=yes
DHCPPrefixDelegation=yes
If you don't want systemd-networkd, look at https://wiki.debian.org/IPv6PrefixDelegation#Using_ifupdown_.... Firewalling is the same as v4, just without the NAT.One frustrating part is that as far as I can tell nothing supports easy downstream DHCPv6-PD delegation, so machines on the downstream network that want their own prefix won't be able to get one automatically. OpenWRT's network config daemon supports it, but nothing on regular Linux does.
> however many /64s that is (at least 8);
256!
If you've not got an Internet[-routable] address, are you truly connected to the Internet?
> I looked in to managing ipv6 from a "i am making my own router" and no OS makes this simple. i tried with debian, and could not get it to route any packets. I literally wrote the guide for using a VM for ipcop and one of the "wall" distros; but something about ipv6 just evades me.
TBH, I would think that this is just enabling v6 forwarding. That wouldn't do RA or DHCP, I don't think, but I don't think you'd want that, either. (That would be the responsibility of the upstream network.)